Conveyor tape, Dnipropetrovsk region.

We make chevron tapes for any techniques
We are ready to make to order a conveyor belt with an oblique chevron for a road cutter. We will offer the best technical solution taking into account the features of your conveyor: angle of inclination, material, diameter of drums, presence of rollers on the lower branch, etc. This technology is widely used in practice and has proven itself well.
We already have experience in such works. The machines we encountered had tape widths of 400 and 800 mm.(//tractor-service.com)
These tapes have one very important feature, they must be very elastic, durable and wear-resistant. The diameters of the drive and tension drums are very small, this is due to the features of the conveyor design. At the same time, the partitions must bend on them and not be glued.
The partitions that we use have a standard appearance (shown in the photo). If necessary, we can manufacture special partitions of any complexity up to 100 mm. We connect the tape with partitions in the same way as ordinary tape and glue "ЕРоС" glue on top of the partition.
Conveyor pit (elevator) belts are conveyor belts with pit buckets made of metal or other materials attached to them. Buckets are fastened with special bolts and can be replaced if necessary. They also differ in design and size, depending on the place of use and the cargo transported by them. This type of tape has universal properties and an affordable price, thanks to which it is used not only for fastening buckets, but also as an ordinary tape for horizontal conveyors.
"