Hydrophobizer plasticizer 4 Stone House 1/5/10 l, Kyiv

Hydrophobizer for surface and volume hydrophobization. Hydrophobic pore clogging agent.

Scope of application: For surface hydrophobization of masonry made of silicate and ceramic bricks, gas and foam concrete, concrete surfaces, plasters of any composition, expanded clay concrete, slate, timber, wood, natural stone, paving stones, limestone, porous natural rocks. For volumetric hydrophobization for the purpose of waterproofing in difficult climatic conditions, high groundwater levels, for the foundations of any structures, hydraulic concrete, basins, sluices, reservoirs, paving slabs, drainage systems and drainage structures.

Properties: Prevents salt deposits, freezing of walls and the formation of an ice crust on paving slabs, the formation of pollution, volumetric wetting of walls in city buildings. Increases the service life of processed materials, increases frost resistance and durability. Prevents the development of microorganisms, moss and lichens on the treated surface. Creates a vapor-permeable and waterproof coating. Provides waterproofing in pools and foundations of buildings. Reduces thermal conductivity due to the waterproofness of treated materials up to 40-50% in winter. Effective for more than 10 years.

Technical data: Transparent liquid, turbidity and white sediment are possible in a small amount, does not affect the quality characteristics, corresponds to DSTU B V.2.7-171: 2008 T 13/18 (EN 934-2: 2001, NEQ)

Composition: Aqueous solution of salts of organosilicon compounds.

Dosage: For surface hydrophobization: The product is ready to use. Consumption 250-300 ml / m2. In the case of a porous surface, it is necessary to apply the 2nd layer. For volumetric hydrophobization: 0.75 - 1.5% of the finishedadditive from the weight of cement or lime in mixing water and enter into the mortar or concrete mixture.(//tractor-service.com)

Warning: In case of violation of the technology of preparation and use of the working solution, as well as repeated processing on a dry layer, it may lead to the appearance of white precipitates.

Performance of work: Before applying the hydrophobizer solution, thoroughly clean the surface of dirt, material chips, and dust. If necessary, level the surface with mortar from cracks and unevenness. Apply with a brush, roller or spray. Work should be carried out at a temperature not lower than + 5 ° C. Do not carry out during rain and high humidity. The working solution should be prepared on the basis of several hours of work, if it is necessary to save the working solution, it must be carefully closed in a polyethylene or glass container.

Precautions: The substance has strong alkaline properties. It is necessary to work in rubber gloves, protective glasses, spray from the windless side. When using, you should follow the rules of labor protection. Avoid contact with eyes. In case of contact with eyes, rinse with plenty of water and consult a doctor.

Storage and transportation: in a tightly closed manufacturer's container, away from heating devices, do not allow direct sunlight to enter. During storage, sediment may fall out, this does not affect the quality of the product.

Disposal: Do not pour residues into sewers, water bodies, soil. After completely using the plasticizer, close the emptycontainer tightly and send it to a household landfill.

Warranty period of storage: 2 years at a temperature from 0 C to +30 C if the rules of storage and transportation are observed.