Plasticizer for concrete C-3, Dnipropetrovsk region.

Plasticizer for concrete C-3
Plasticizer for concrete In stock
A bag of 25 kg. price 1500 UAH

Plasticizer for concrete C-3 — superplasticizer c3 with combined antifreeze and accelerating action. The additive is intended for the production of concrete works in conditions of reduced and negative temperatures, to prevent freezing of the mobile concrete mixture before the start of heat treatment, as well as for highly mobile concrete mixtures, when erecting monolithic structures in the warm season.

Plasticizer for concrete

Scope:

production of highly mobile commercial concrete under normal conditions and under conditions of reduced temperatures (up to -10ºС);
high-class concrete, bridge and road concrete;
products and structures with increased characteristics of waterproofness, frost resistance, corrosion resistance, etc.;
products in maintenance conditions.
Action:

Plasticizer for concrete C-3 allows:

to increase the mobility of the concrete mixture from P1 to P5;
to ensure the growth of early strength at temperatures up to -10°C;
increase the strength of concrete by 15-20% with the same amount of cement;
reduce the water consumption of the concrete mixture by 10-20%;
improve durability characteristics (waterproofness, frost resistance, corrosion resistance);(//tractor-service.com)
to reduce the consumption of cement at the same strength with no additional;
reduce water consumption and delamination of the concrete/mortar mixture;
reduce the maintenance parameters.
To alignment:

The additive is dosed in the amount of 0.5-2.5% of the weight of the cement on a dry matter basis, is introduced with the mixing water and is calculated according to the formula:

For example: spendingadditives 1.5%, per 100 kg of cement the amount of additive = (100*1.5)/(1.21*34)=3.6 l.

Delivery form:

Plasticizer for concrete C-3 is supplied in bags of 25 kg.

Plasticizer for concrete C-3R is produced in the form of a ready-to-use powder solution. To make a solution of additives from powder, it is necessary to dilute it with water in a ratio of 1:2 (powder: water) and mix well. Allow the solution to settle for a day and mix again.

The resulting aqueous solution should have a density of 1.2-1.22 g/cm³.
plasticizer for concrete buy Ukraine
The warranty period of storage in dry form is 24 months. from the moment of manufacture at a temperature from -20 to +20°C. (in a dry, ventilated room, and during heat 30+ it can flow like plasticine, but the properties do not change)

Tile and fence manufacturers advise adding:

Plasticizer for paving slabs consumption of 0.5% of the mass of cement - 0.5 kg per 100 kg of cement.
Plasticizer for fences 0.8% of the mass of cement
Dilute 1 kg of C-3 with 2 liters of water: add to concrete at the rate of 1.5 - 2 liters of plasticizer per 100 kg of cement. stolbov