Kormovoy extruder, Vinnytsia region.

Kormovoy extruder
We are manufacturers, always in stock, you can come to us for production, we will show you how it works and how to operate it, all spare parts are always available, there is delivery by cash on delivery, by any carrier, we can bring it ourselves!

We manufacture screw extruders, which are intended for the production of fodder from grain and leguminous crops.
The screw extruder is used for quick preparation of dry fodder.Extruders grain of wheat, barley, corn, millet, soybeans, rye, barley, etc. is processed. At the same time, the grain does not require preliminary steaming. During grain extrusion at a temperature of 130-180g. and high pressure of 20-30 Atm occurs:
The use of pea, corn, barley, wheat extrudate in pig feeding allows:
- intensify the average daily weight gain of pigs by 15.7-27%, reduce feed consumption (including deficient feed of animal origin).
- to reduce the number of piglets due to a sharp (12-17 times) decrease in bacterial fungal seeding of grain.
(//tractor-service.com)
- transformation of fiber,
- splitting of starch
- pathogenic microflora (bacteria, fungus, mold) dies. The finished mixture takes the form of a bundle, which can be cut off or remain intact. An extruder for fodder with a cutter is necessary for the production of fodder for small animals, birds or fish.
Приготовленный комбикорм — отличный кишечный абсорбент, выводящий нежелательные, отравляющие организм вещества. Готовая смесь принимает форму жгута, который может отсекаться или оставаться целостным. Экструдер для кормов с отсекателем необходим для изготовления корма мелких животных, птиц или рыб.
The use of an extruder in agriculture makes it possible to produce highly effective feed with improved performance.
Priceof own compound feed production is lower than the cost of ready-made products offered by suppliers. Unlike many other types of production, similar devices are easy to use and do not require special skills for such activities.
Processed raw materials - grain and leguminous crops with a moisture content of 15-18%
The output product is an extruded product in the form of balls or short sticks up to 20 mm long.
Supply of raw materials - smooth adjustment of the screw dispenser.
The extruder is installed on any level floor, even an earthen one. A foundation is not required for installation. There are no external heaters in the car. After 60 seconds after the start of work - a finished product of good quality. The supplied grain does not require prior steaming.