= Sprayer Stanger 3000 l Stang 18, 21, 24 m - compensation - 25%, Kiev region UAH

Обприскувач штанговий 3000 л штанга 18, 21, 24 м

Причіпні обприскувачі виробництва ПП «Агротехніка» Глеваха Київська обл. (Україна)

According to the updated list of domestic equipment and equipment for the agro -industrial complex, the cost of which is partially offset by the state budget, approved by Protocol No. 6 of the meeting of the commission for the formation state compensation of 25% and additional 15% for small farms.

The compensation program 25% (and 40% for small farms) from the cost of domestic agricultural machinery, purchased in 2018, was approved OSH series sprayers are made with a 3000 l tank and a width of the barbell of 18 m, 21 m, 24 m.

Обприскувачі серії ОШШ виготовляються з міскістю бака 3000 л та шириною захвату штанги на 18 м, 21 м, 24 м.
= All sprayers are equipped with Italian equipment Arag, Lechler, Imovilli Pompe (control panel, nozzles, hoses, filters, pump=).
Are delivered in the assembled state with the cardan shaft.

Technical characteristics:
Productivity for 1 hour of the main time - 19.2 - 28.8 ha/year;
Tank capacity - 3000 liters;
Working width of the grip - 18, 21, 24 m;
The working fluid consumption rate is regulated within - 70 - 400 l/a
Working speed - 8 - 12 km/h;
Serve pump= - from 160 to 250 l/min;
= Working pressure - 1.5 - 8.0 atm;
The height of the sprayers from the Earth's surface is regulated within - 0.5 - 1.8 m;
Clearance - 0.75 m ( tires= 9.5 R 42)

Бак обприскувача має опуклу форму для повного спорожнення рідини при стабільній роботі насоса, в середині бака ставитися перегородка для міцності і надійності бака. (// tractor-service.com)
Всі баки мають ємності для промивки системи, самозакачюючий механізм.
The sprayer bar developed and patented by the manufacturer, fully
Hydrofed (parallelogram mechanism) with a vertical frame, a mechanism of stabilization, support brackets. Lifting height up to 1.8 m, lowering up to 0.5 m. The barbell has an effective hanging mechanism, in which the fluctuations of the sprayer in the vertical plane are switched to the vibrations of the bar in the horizontal plane, which ensures high uniformity and high reliability of the bar.
The rod of the sprayer of the volume structure, lifting and lowering, assembly and decomposition is carried out by means of a hydraulic system from the cabinet of the tractor. Fixing the position of the bar in the decomposed state is carried out by means On the bar in places of possible abrasion, plates of material that have a low coefficient of friction are installed.
На штанзі в місцях можливого її стирання встановлені пластини із матеріалу, який має наднизький коефіцієнт тертя.

= The term of production of sprayers up to 10 working days from the time of prepayment 10 %
All sprayers at the request of the client can be equipped with additional equipment
= Computer Bravo-180s (the main function of control control regardless of speed):
= Computer Bravo-400s (Extracting shutdown of rods, assigned navigation system)
Міксер:
- tank 28 l - (Ukraine)
- бак 25 л –(Італія)
- бак 35 л – (Італія)
Промопора
Stangs
The feet of dimensions.
Set of System Flush Tanks (in the Italian Tank already gone)
Промивка бака
Stainless pipes in replacement of PPR pipe (surcharge)
3-х позиційні форсунки з розпилювачами ST, IDK, КАС(Італійського виробництва, розпилювачі фірми Lechler)
Форсунка 3-х позиційна ПОЛЬСЬКА з розпилювачами ST, ST-С, КАС: (на 7 отворів)
Знаходяться на Великій Торговій Площадці на трасі Київ-Одеса в смт. Глеваха вул. Окружна, 55-Д
There is, the export, delivery by our transport - 30 UAH. for km (one way calculation)