Injector sprayer ID from Lechler (Germany), Kyiv region.

Spray injector ID of Lechler company (Germany)

Spray torch angle: 120°/90°
Material: POM, ceramics

Characteristics
Air-suction flat torch sprayer
Exceptional anti-wear qualities, even at high pressure.
Significant improvement in coating density due to drops filled with air bubbles
They are used in field, plowed and special crops.
Ranges of optimal working pressure:
ID-01 to -08: 4.0 to 8.0 bar
ID-05 to -08 from 2.0 to 8.0 atm
Suitable for all bayonet clamps and cap nuts with a hole of 10 mm.
In combination with IS end sprayers (of the same standard size), it is possible to do processing exactly along the edge.(//tractor-service.com)
Included in the list of drift reduction are the following certifying organizations: LERAP, JKI (former BBA), Staatscourant, SPF, Hjälpreda, ÖAIP and Equipement de limitation de la dérive de pulverization.

Recommended applications
Introduction of SSR and growth regulators
They are partially well suited for making liquid-crystalline fertilizers (KAS);
Pressure range for pure KAS: ID 2.0 to 3.5 bar; IDN 2.0 to 4.0 bar

The main advantages of sprayers ID
Durable design
Easy-removable injector
Two air suction holes eliminate the risk of clogging
Wear-resistant and non-clogging design, thanks to round holes and large passage sections.
High biological efficiency of processing.
Applying less depends on weather conditions. Thanks to this, the processing takes place on time
Processing is possible in windy weather (up to 5 m/s) and higher speeds of the equipment.