Elevator noria belt self-supporting bucket "Leader", Cherkasy region.

The industrial elevator noria is used for vertical feeding of bulk materials.
The bucket elevator (bucket elevator) is used in various industries where bulk substances are used. But the main sphere of its use is grain storage, mills, flour mills, feed mills, and the chemical industry. Noria bucket is the best and optimal device for feeding raw materials vertically in modern elevators, given the large size of their containers. The noria elevator works according to the following principle: due to the constant movement of the belt conveyor, on which special buckets are attached, the raw material is lifted. The necessary loose material is collected by buckets in the lower part of the conveyor belt, rises vertically and pours out in the upper part through the nozzle. Then the overturned buckets are sent down. According to technological standards, the lifting height does not exceed 60 meters. An important feature of the bucket noria elevator is reliability, as this equipment can withstand heavy loads: the buckets are fixed at a given angle, the continuous belt is vulcanized, all mechanisms of the belt conveyor are protected from bad weather, and therefore the equipment works effectively in any climatic conditions.(//tractor-service.com)
To protect the belt mechanism of the noria, special pipes are used, which form a kind of mine. They are located along the entire length of the frame, fix the buckets and, thus, provide the necessary insurance against sudden movement of the mechanism. The economy of the construction is provided by the special design of the bucket. The centrifugal-gravitational unloading method creates the necessary power, which reduces the load on the drive motor. Thus, the buckets attached to the continuous conveyor belt grab the raw material that enters the conveyor and, moving vertically with the help of the conveyor, raise it from the lower to the upper level, bypassing the upperwheel, then with the help of the centrifugal-gravitational force, which occurs due to the sudden movement, the raw material is dumped into the bunker. The main advantage of the bucket elevator of the noria is its durability, high productivity and practically silent work process.
The NLSC "Leader" model bucket plow makes it possible to vertically move seeds,grain, their processing products, and other loose raw materials. It is made of carbon/low-carbon steel with zinc plating or stainless steel. When made of black metal, the product is covered with paint and varnish materials. Chute buckets are made of metal and are attached to the belt with special bolts. The provided model of the noria has a self-supporting design and can also be used for work not only indoors, but also on the street.