Production of injectors in Cherkassy, ​​Cherkasy region.

The injector is intended for continuous injection of meat on the bone and without bones and injection ofbirds. The welded construction is made of stainless steel, the surface is cleanly ground and polished, the working speed, pressure and amount of injected brine are precisely regulated.
Meat intended for injection is manually or automatically fed through the loading tray to the conveyor of the machine. When the injection product passes under the needles, the conveyor belt stops. The frame with the needles is lowered and the valves are mechanically opened, the brine is supplied in such a way that while the needle passes from the upper to the lower end of the product, it is saturated with brine. After the needle exits the meat, the valve shuts off the supply of brine, and a special rocker mechanism paired with a ratchet drive moves the conveyor belt to the set step, for the subsequent injection of brine.(//tractor-service.com)
All the brine that did not get into the product drains through a special drain chute into the tank. Passing through the filter, it is cleaned and again returned to the pipeline system of the injector.
After injection, the meat is fed through the unloading tray to the corresponding trolleys, which are placed at the end of the conveyor. The adjustment of the injection is made by changing the pressure of the brine, as well as by changing the step of the conveyor.