Машина для миття та очищення овочів STvega ST H800, Київ

= Stvega ST H800 Machine is intended for washing and cleaning of fruit and vegetable products. It is best suited for the following products: Potatoes=, carrots, beets, ginger, Jerusalem article=, celery root and other products. Equipped with shafts with a hard brush for washing / purification of vegetables=. The principle of operation:

Принцип роботи:
The product intended for washing/cleaning is loaded into a wash bath. The operator with the help of a removable control panel sets the speed and time of operation of the brush shafts and activates the machine. On top of the entire length of the washing bath, thin jets are supplied with water. The product is washed/cleaned by means of rotating or rotating brush or corundum shafts within about 2 - 5 minutes (depends on the product and the degree of contamination). The exhaust water flows into the pallet and through the nozzle can go into the prepared container or directly into the sewer. Further, the operator with the help of a lever opens a wash bath and a washed/purified product enters the unloading trench, and from it - into the container for finished products or for the next stage of technological processing.

= Advantages of equipment:
• remote control unit - for maximum protection of the control panel from moisture contact, prevent water from entering the machine, ease of operation in production, the ability to place at a comfortable distance from the machine to control the machine.
= • Lid with inspection window - prevents water around the machine, an additional opportunity to maintain cleanliness at the production. The lids have shock absorbers that fix the lid in the desired position for the convenience of the operator.
• built -in frequency converter (variator) - provides a smooth start of the engine of the machine, which lengthens the service life of the machine twice, prevents stretching of the drive circuits. Ability to adjust the speed of rotation of the shafts, thus it is possible to control the quality of peeling of the root.
• Timing function - the ability to set the time for washing/cleaning root crops on the control panel.

There is an opportunity to install different types of shafts on the machine:
1. Brush shafts with varying degrees of rigidity:
 for washing - shafts with a soft brush MM (any root crop);
 for cleaning - shafts with a stiff brush st (carrots, beets, young potatoes).
= 2. Combined shafts CB (brush and corundeal) for washing and simultaneous cleaning of root crops.

= Features:
Productivity: 200-400 kg/h (depends on product) (// tractor-service.com)
= Dimensions: 1300*830*900 mm
Shaft length: 800 mm
Number of shafts: 6 pcs
Single Download: 40-50 kg
Washing cycle time: 2-5 min
Water consumption: 0.8-1 m³/h
Power: 1.5 kW
Voltage: 380 V
Material: stainless steel SUS 304
Weight: 220 kg
Additional function: variator (frequency converter)
Середній коеф. втрат (миття): 0-5 %
Type of shafts: Hard brush

Go to our channels to watch interesting videos on equipment work:
https://www.youtube.com/@st_vega
https://www.instagram.com/st_vega_ - інстаграм сторінка
= https://www.tiktok.com/@stvega - Our Tick Tok
https://t.me/vega_st_ua - телеграм канал
https://www.facebook.com/stvega1 - фейсбук