Комплект
tractor air conditioner MTZ 892, 82.1, 82.2, 1221
This kit is intended for creating comfortable climatic conditions in the cabin of tractors of the Belarus Minsk Tractor Plant of the 80th, 800th and 900th series with the MMZ engine, D-242 (and its modifications).
The roof condenser is designed taking into account all the design features of MTZ tractors, which greatly simplifies its installation. The capacitor unit consists of:
- aluminum capacitor;
- filter-drier receiver horizontal;
- pressure sensor;
- fan;
- wiring, relay.
The operating voltage of the condenser blowing fan is 12V.
Complete set of air conditioner: 165
Компрессор SD5S14; «SANDEN» Сингапур или Аналог
Type - piston, with vertical fittings outlet-3/4-16UNF(O-ring) inlet-7/8-14UNF(O-ring); Productivity - 138 s/c;
Operating speed - 700-6000 rpm; Number of cylinders - 5 pcs.;
The power supply voltage of the electromagnetic clutch is 12V;
The power consumption of the electromagnetic clutch is 45W;
Drive pulley - 132mm. A2; Belt type - wedge.
(//tractor-service.com)
The compressor is installed on the running engine of the tractor on the left in the direction of movement of the tractor and is driven by a V-belt. The compressor bracket is specially designed for the MMZ D-242 engine (and its modifications).
Evaporative heating unit
With decorative panel, 12V fan, thermostat, TRV, fan speed switch (3 speeds), input 5/8-18 UNF (O-ring), output 7/8-14 UNF(O-ring); Overall dimensions (WxDxH) - 393x317x140 mm;
Cooling capacity - 5 kW; The capacity of the fan is 500 cubic meters. m./time; Consumable email power - 150 W; Power supply - 12V.
The evaporative heating unit is installed under the ceiling panel, instead of the standard heater. Air conditioner controls are placed on the ceiling panel.
Capacitor:
The condenser block is installed on the roof of the tractor, which prevents the engine from overheating and significantly facilitates the installation of the air conditioner on the
tractor.
With pressure sensor and filter-receiver assembly:
incl. compressor -> 2 kg/cm2; Off compressor -> 32 kg/cm2;
A set of cooling wires (4
hose);
Wiring kit for aftermarket installation;
Compressor mounting bracket, pulley (two-way).
All consumables necessary for installation are included in the air conditioner kit.
Options for installation and equipment of the air conditioner can be changed at the request of the customer. Both universal split systems and roof blocks (monoblocks) of increased power are available.