Sprayer for wind work IDK, Poltava region.

Injector sprayer for wind work IDK Lechler (Germany)

Characteristics of sprayers IDK Lechler
The range of workers is pressed:
IDK-01 to -03 with 1.5 to 6.0 atm
IDK-04/-05 with 1.0 to 6.0 atm
At a pressure of more than 3 atm, the anti-erosion efficiency is less than that of the well-known ID sprayers. Droplet sizes from large to medium.
Very compact dimensions (length: 22 mm)
Suitable for systems with bayonet heads with an 8 mm hole.
They meet the requirements of the FSB of Germany
Certified by the Federal Biological Department of the Federal Republic of Germany in the class of sprayers with reduced losses

Fields of application of sprayers IDK Lechler
Introduction ofplant protection products and growth regulators(//tractor-service.com)
They are especially suitable for applying liquidfertilized (LHCU)
The range of workers is compressed for clean housing units:
IDK -01 to -03 from 1.5 to 2.5 atm
IDK -04/-05 from 1.0 to 2.5 atm

Advantages of atomizers IDK
An affordable alternative to standard sprayers. Excellent price/quality ratio
One-component design of the atomizer with a freely removable injector and a fixed seat.
Minimal risk of clogging thanks to the central supply in the sprayer channel and large air holes on the side surfaces of the body
Very good coverage density and penetration into the stem.
Optimal operating modes, confirmed by experience, at wind speed up to 5 m/s and driving speed up to 12 km/h at low pressures

Additional advantages of IDKN atomizers
Maximum reduction of losses up to 90%
Special anti-erosion properties in the working pressure range from 1.5 to 3.0 atm.