Mechanical face seals for pumps and compressors, Kyiv

Our specialists will help you choose a high-quality and economical replacement for end seals of well-known manufacturers Burgmann, John Crane, Roten, ASSEAL, Anga, Vulcan and others.
End seals are used for pumps: Grundfos, Roten, Alfa Laval, APV, Fristam, Inoxspa, Lowara, Calpeda, Wilo, Tuchenhagen, SKC, SCD (Hydro Vacuum), Ebara, K.S.B, Allweiler.
Face seals for vertical multistage pumps Lowara SV, SVI and forfaecal pumps Wilo FA, FK.
Seals for compressors Bitzer, Bock, Carrier, Carrier-Sutrak, Copeland, Daikin, Dunham Bush, Frick, Gram, GEA Grasso, A.P.V. Halls, Howden, Lightfoot, Mycom, Sabroe, Stal, Thermo-King, Witt, Zanotti

Advantages of end-sealed Vulcan:
• reliable and long-lasting sealing of the shaft in comparison with standard seals;
• reduction of operational costs, reduction of downtime, repair and adjustment of equipment;(//tractor-service.com)
• there is no need for additional finishing of sealed parts during installation;
• the possibility of working in environments with different characteristics, including aggressive, polluted and abrasive environments.
• interchangeability with the majority of standard compacted.
• ideal ratio of price and quality, fast and accurate execution of the order.

End seals for Vulkan pumps and compressors are manufactured using modern technologies and have a longer service life compared to standard seals. Fitting dimensions and characteristics allow you to choose ends for any equipment for all working environments, temperatures and pressures. The high quality of the "mirror" surface treatment and the use of modern materials in the friction pairs ensure a high degree of reliability of the Vulcan face mechanical seals.
Vulcan mechanical seal for pumps and compressors is an effective sealing device for sealing rotating shafts in industrial equipment such aspump, compressor, stirrer and mixer. Thanks to the use of our mechanical face seals, leakage through rotor seals is reduced. Losses of liquid through the sealed connection when using a stuffing box seal - 3-5 liters per time, which leads to huge losses of energy, valuable raw materials, water, etc. Face sealing with rings made of hard antifriction materials reduces losses to 0.002 - 0.035 liters per hour.
In Vulcan face seals for pumps and compressors, tightness is achieved due to tight compression on the end faces of two rings - a rotating and a stationary one, for which the design of the face seal unit must include an elastic pressing element (spring, bellows, membrane), which, together with a pressure sleeve and a rotating sealing ring, forms an axially movable unit (or a pressing unit).
The rubbing rings make up a friction pair. Silicon carbide, ceramics, graphite, carbon graphite materials, metals, polymer materials are used for their manufacture. Secondary seals are made ofrubbers, rubber, fluoroplastics, fluoropolymers.