Grain crusher, hydromill "Appetite GM2" on 220V, Nikolaev region.

Hydromelnitsa - "Appetite GM2" - from water and any grain prepares hot, nutritious fodder porridges, used for quick, economical fattening and keeping of pigs, cattle, rabbits, ducks, ducks, chickens, dogs and other domestic animals and birds.

Not one of the well-known methods of preparing fodder from grain - dry grinding, cooking, flattening, extrusion, steaming... does not give fodder of such high quality as GM processing.
With GM2, you can create a feed processor of your own design capable of feeding 10-15 head of cattle and up to 50 piglets (there are examples of 60-90).

Technical data of GM2:
-- electric power engine ГМ2 2.2 kW/220V/2860 rpm;
-- wear-resistant activator made of spring-spring steel 65G with heat hardening;
-- stuffing box - end seal made of ceramic graphite;
-- outlet diameters. nozzle - 32 mm, inlet - 50 mm;
-- total weight – 23 kg.
The recommended volume of the bunker is from 30 to 150 liters.

GM works as apump - it sucks the water-grain mixture from the hopper, passes it through itself and returns it back to the hopper. At the same time, the grain is ground into small grains, and the resulting cavitation*, which is provoked by the activator, heats the composition, breaks down starch, polysaccharides, fiber and other components of the grain into components that are easily absorbed by the animal's intestines. In this process, grain starch partially changes to a simpler form - saccharification of the composition occurs. The result is hot, sweetened porridge with a pleasant smell. Obviously, animals feel sweetness and even tasteless straw flavored with it is eaten quickly and with appetite! - the "clean trough" effect.

I.e. the main digestion of grain takes place not in the stomach, but in the hydromill, due to electrical energy and the cavitation process. Animals and birds easily digest "chewed" food without expending energy, hence the increase in egg production, weight gain, and improvement in their general condition. The possibility of complete or partial rejection of premixes!

Advantages of using GM and wet feeding technology:

-- reduction of consumption of fodder due to improvement of their quality, ideal mixing of introduced additives. Up to 40% of grain is saved.

-- allows you to prepare nutritious fodder porridge from any grain, completely abandon premixes! and get high-quality meat and fat!(//tractor-service.com)

-- the fodder mixture, when heated to 60˚С, retains the maximum biological value when it is prepared from natural grain immediately before feeding.

-- in the process of preparation, cavitation* disinfects the feed, bacteria introduced from the field and during storage die, i.e. possible use of moldy, infected fodder components!

-- up to 6 months, instead of 10-12, the fattening period is reduced. The opportunity to grow two generations of animals per hour on one area.

-- facilitates the work of the animal breeder, saves space, time, electricity. energy, there is no need to buy compound feed, which is 30-40% more expensive than grain.

-- exploitation of GM is profitable, because one unit replaces several pieces of equipment and performs: grain grinding in water, thorough mixing, vortex heating, active steaming, hydrolysis of the grain mixture and pouring of the produced porridge into feeders - by gravity or under pressure.

-- grinding in an aqueous environment is economical, there is no dust, less power is required with minimal wear of the mechanism. With the help of GM, each kilogram of grain increases in price 5 times or more.

The technologies of economical feeding are based on the highest quality preparation of fodder, when the stomach of the animal spends minimal effort for its assimilation, the main work is performed by the equipment. GM successfully solves this problem, and wet feeding technology has the best performance, compared to dry and extruded.

In the photo - aggregates of different power and productivity, the basis of which are hydromills.

Thank you for your interest. Now you know that there is such technology and such equipment. Delivery of aggregates to any address in Russia, Kazakhstan, Ukraine is possible.

Any questions about the use of the unit, purchase, payment, delivery -[email protected]; phone: +38 067 2825117; +38 095 3505197 Viber, WhatsApp; Skype: voka531

* Cavitation is a process that destroys solids in a liquid - ship propellers, workingwheels pumps.... In our case, it decomposes the grain, sterilizes the substance without boiling, killing spores and bacteria. She also warms up the composition