Tegeron Primer Ecobit bucket 10, 0 l - adhesive composition DSTU B V.2.7-108-2001, Dnepropetrovsk region.

Tegeron Primer Ecobit bucket 10.0 l - adhesive composition DSTU B V.2.7-108-2001 Necessary for preparing the base before laying self-adhesive waterproofing and roofing materials. Provides strong adhesion of waterproofing materials to rough and dusty surfaces.

Tegeron Primer Ecobit - adhesive composition DSTU B V.2.7-108-2001
Installation of a new roof, repair of an old one (instead of roofing material - bituminous coating or in combination with it), coating waterproofing of foundations, walls, for sealing closed vertical and horizontal joints of external walls, etc., sealing of joints of rolled insulating materials, waterproofing of various surfaces (reinforced concrete, metal, wooden, etc.), sealing of closed vertical and horizontal joints of external walls, waterproofing of floors (showers, bathrooms, toilets).
It is a waterproofing sealing construction mastic made on the basis of petroleum bitumen, butyl rubber, high-quality solvents and other technologicaladditives. It is necessary to prepare the foundation before laying self-adhesive waterproofing and roofing materials. Provides strong adhesion of waterproofing materials to rough and dusty surfaces.

Appointment

To use the Tegeron primer, the surface must be cleaned of loosely held, destroyed elements, mud and dust (garbage). Mastic is applied to a dry surface with a roller, brush or spatula, at an ambient temperature of at least 0 °C. Mastic is intended only for outdoor work.

Mastic serves to prepare concrete and metal surfaces with the aim of improving their adhesive properties before laying floating roofing materials on them. Fully ready-to-use mastic. The drying time of each layer with a thickness of 1 mm depends on the temperature of the environment and varies from 1 to 24 hours.

Properties
- is a thick mass ready for use, which when(//tractor-service.com)
if necessary, it should be mixed;
- it easily yields to the pressure of the application tool;
- has good adhesion to horizontal and vertical surfaces.

Application
The surface must be cleaned of loose, broken elements, dirt and dust. Mastic is applied to a dry surface with a roller, brush, spatula, in a layer of at least 1 mm at an ambient temperature of at least 50 C.
When performing roofing waterproofing works, the surface must be cleaned of loosely held, destroyed coating elements, mud, dust, grease and other contaminants. Mastic is applied to the surface with a brush, spatula, roller in a layer of at least 1 mm at an ambient temperature of at least 50 C.
Consumption of mastic is 0.8 - 1.2 kg/m2. The drying time of each layer with a thickness of 1 mm depends on the temperature of the environment and varies from 1 to 24 hours. When the thickness of the layer increases, the drying time can increase.
In order to increase the stickiness of the mastic and the convenience of work, in the cold season, it is recommended to pre-heat the mastic in a metal container over a closed fire to 500C.

Storage
Store away from fire and heating appliances.

Packaging
Mastic is packaged ina container with a capacity of from 10 kg to 45 kg.