Tegeron Sealant EKOBIT mastic butyl rubber bucket 20 kg, Dnepropetrovsk region.

Tegeron Hermetik Ecobit mastic butyl rubber DSTU B V.2.7-106-2001 It is a sealing, waterproofing, anti-corrosion mastic made on the basis of butyl rubber, latex and other technological additives

It is a sealing, waterproofing, anti-corrosion mastic made on the basis of butyl rubber, latex and other technological additives.

PURPOSE:

sealing of closed vertical and horizontal joints of external and internal walls;

- waterproofing of floors (showers, bathrooms, toilets) ;

- sealing the joints of rolled insulation materials;

- anti-corrosion coating of gas and water pipes, metal structures, car bottoms, etc. The mastic applied to the metal surface provides a reliable anti-corrosion coating, significantly increases the service life of pipelines and metal structures.

- sealing of structures made of profiled glass;

- sealing of places where window and door blocks are joined to elements of residential and public buildings;

- for applying a waterproofing sealing coating of internal and external surfaces of premises, facades of buildings with subsequent installation of plasterboard, heat and sound insulation materials (foam, insulation, etc.) ;

- sealing, waterproofing of various surfaces (concrete, metal, wood, etc.) inside and outside the premises.

PROPERTIES:(//tractor-service.com)

- is a viscous homogeneous mass ready for use, which must be mixed if necessary;

- easily succumbs to the pressure of the tool used;

- has good adhesion to horizontal and vertical surfaces;

- does not contain bitumen;

- does not crack;

- has the property of flexibility at low temperatures;

- flow resistance and shrinkage at high temperatures.

APPLICATION:

The surface must be cleaned of weak hold, destruction of coating elements, dirt, dust. Mastic is applied to a dry surface with a roller, brush, spatula, at a temperature of the treated surface not lower than 00C. When applying a continuous coating, the consumption of mastic during the application of one layer is at least 1.0 kg / m.2. The drying time of a layer 1 mm thick is 24 hours.

If necessary, it is possible to dilute the mastic with a solvent (solvent, white spirit,gasoline-solvent). To increase the adhesion of the mastic and ease of work, in the cold season, it is recommended to pre-heat the mastic in a metalcontainer on a closed fire to a temperature of 500C.

Before application, it is recommended to apply a priming layer with "Tegeron-ground" mastic

STORAGE: Keep as far away from fire as possible at temperatures above 00C.