Mastic butyl rubber bucket 20, 0 kg BITELAST - SEALANT Ecobit DSTU B V.2.7-108-2001, Dnepropetrovsk region.

Butyl rubber mastic bucket 20.0 kg BITELAST - SEALANT Ecobit DSTU B V.2.7-108-2001 (GOST 30693-2000) Sealing of closed vertical and horizontal external and internal joints walls, waterproofing of floors (showers, bathrooms, toilets), sealing of joints of rolled insulating materials, anti-corrosion coating of gas and water pipes, metal structures, car bottoms, etc.

Appointment:

- sealing of closed vertical and horizontal joints of external and internal walls;
- waterproofing of floors (showers, bathrooms, toilets);
- sealing of joints of rolled insulating materials;
- anti-corrosion coating of gas and water pipes, metal structures, car bottoms, etc. The mastic applied to the metal surface provides a reliable anti-corrosion coating, significantly increases the service life of pipelines and metal structures.
- sealing of structures made of profiled glass; 150
- уплотнение мест примыкания оконных и дверных блоков к элементам жилых и общественных зданий;
- for applying a waterproofing sealing coating of internal and external surfaces of premises, facades built with the subsequent installation of plasterboard, heat- and sound-insulating materials (foam, insulation, etc.);
- sealing, waterproofing of various surfaces (concrete, metal, wood
etc.) inside and outside the premises.

Properties:
- is a viscous homogeneous mass ready for use, which should be mixed if necessary;(//tractor-service.com)
- it easily yields to the pressure of the applied tool;
- has good adhesion to horizontal and vertical surfaces;
- does not contain bitumen;
- does not crack;
- has the property of flexibility at low temperatures;
- resistance to flow and shrinkage at high temperatures.

Application:

The surface must be cleaned of loosely held, damaged ones.
coating elements, mud, dust. Mastic is applied to a dry surface with a roller, brush, spatula, at a temperature of the treated surface not lower than 0°C. When applying a solid coating, the consumption of mastic when applying one layer is at least 1.0 kg/m2. The drying time of a layer 1 mm thick is 24 hours.
If necessary, it is possible to dilute the mastic with a solvent (solvent, white spirit,gasoline-solvent). In order to increase the stickiness of the mastic and the convenience of work, in the cold season it is recommended to pre-heat the mastic in a metal container over a closed fire to a temperature of 50 C.

Before use, it is recommended to apply a primer layer with "Bitelast - primer" mastic.

Storage: Store away from fire at temperatures above 0°C.
Packaging: 5 kg, 10 kg, 20 kg, 45 kg