Bitumen-rubber mastic for waterproofing MBR-42 Ecobit GOST 30693-2000 20 kg, Dnepropetrovsk region.

Mastic MBR - 42 Ecobit Bituminous rubber waterproof mastic - Bituminous rubber is a waterproofing material that is popular when performing construction and installation work on roof coverings
ICBM-39 Ecobit
Description
MBR - 42 Ecobit It consists of high-quality bitumen, organic solvents, mineral filler, finely dispersed rubber crumb, plasticizer, synthetic rubber, special polymer additivesadditives, as a result of which it has high elasticity, frost resistance, heat resistance, adhesion, as well as good adhesive, waterproofing properties and strong adhesion to metal and concrete. Rubber-bitumen MBR mastic - 42 Ecobit is ready for use.

Field of application

Rubber-bituminous mastic MRB - 42 Ecobit intended for:

for anti-corrosion protection;
for waterproofing metal, concrete, wooden and other construction structures, including pipelines;
for the installation and repair of a flat roof, as well as the sealing of seams and cracks during roofing works;
to protect the bottoms and arches of cars as a noise-absorbing and vibration-isolating coating;(//tractor-service.com)
for gluing various building materials.
Before using MBR - 42 Ecobit rubber-bituminous mastic, it is necessary to mix it well and only then apply it to the base with a brush, spatula or in bulk. If necessary, the mastic can be diluted with a solvent (nefras), white spirit,kerosene or similar solvents.

Before applying mastic, the base must be prepared: clean, durable, dry, without frost and ice. The temperature of the air and the treated surface during the work should be from - 10 to + 40°C, the relative humidity of the air - no more than 80%. At an air temperature below 0°C, the mastic should be heated to a temperature of + 30°C - + 60°C.

Consumption

When applying a layer of mastic with a thickness of no more than 1.0 mm, the consumption is 1.0 - 1.5 kg/m2, depending on the surface of the base. For better waterproofing, it is recommended to apply 2 - 3 layers. Each subsequent layer is applied only after the previous one has dried. The drying time of each layer takes from 3 to 24 hours, depending on the air humidity and at an ambient temperature of 20°C.

Security measures

Mastic contains organic solvents, so smoking and open flames are prohibited when working with it;
Do not allow rubber bituminous mastic to come into contact with open areas of the skin, as well as in the mouth and eyes.
When carrying out work, it is recommended to use gloves and protective glasses.