Machine for washing and cleaning carrots, potatoes, beets, ginger STvega ST F800, Kyiv

The STvega ST F800 machine is designed for washing or washing and cleaning fruit and vegetable products depending on the type of shafts installed in the machine. Best for the following foods: potatoes, carrots, beets, ginger,topinambur, celery root and other foods. This machine is equipped with shafts with a hard brush for washing/cleaning vegetables.

Principle of operation:
The product intended for washing/cleaning is loaded into the washing tub. The operator, using the panel of the remote control unit, sets the frequency of rotation and the time of operation of the brush shafts and activates the operation of the machine. From above, along the entire length of the wash tub, water is supplied in thin jets. The product is washed/cleaned with rotating brush shafts for approximately 2 - 5 minutes (depending on the product and degree of contamination). The waste water flows into the tray and through the nozzle can go into a prepared container or directly into the sewer. Next, the operator opens the lid of the washing bath with the help of a lever and the washed/cleaned product enters the discharge chute, and from it - into the container for finished products or to the next stage of technological processing.

Equipment advantages:
• Remote control unit – for maximum protection of the control panel from contact with moisture, prevention of water ingress from the machine, ease of operation in production, possibility to place at a comfortable distance from the machine for controlling the machine.
• Built-in frequency converter (variator) - provides an opportunity to smoothly start the machine's engine, thanks to which it doubles the life of the machine, prevents stretching of the drive chains. It is possible to adjust the speed of rotation of the shafts, thus it is possible to control the quality of root crop cleaning.
• Timing function – the ability to set the time for washing/cleaning root vegetables on the control panel.
• Swivelwheels – for easy movement of the machine around the shop.

It is possible to install different types of shafts on the machine:
1. Brush shafts with different degrees of stiffness:
 for washing - shafts with a soft brush MM (any root);
 for cleaning - shafts with a stiff brush ST (carrot, beet, new potato).
2. CB combined shafts (brush and corundum) for washing and simultaneous cleaning of root crops.

Features:
Productivity: 300-400 kg/h
Dimensions: 1300*830*800 mm(//tractor-service.com)
Length of the shafts: 800 mm
Number of shafts: 6 pcs.
Single loading: 50 kg (carrots, potatoes)
Washing cycle time: 2-5 min.
Water consumption: 0.8-1 m³/h
Power: 1.5 kW
Voltage: 380 V
Material: stainless steel SUS 304
Weight: 270 kg
Additional function: variator (frequency converter)
The average coefficient losses: 2-5%
Type of shafts: hard brush

Go to our channels to watch interesting video reviews on the operation of the equipment:
https://stvega.net - site
https://t.me/vega_st_ua - Telegram
https://www.youtube.com/@ST_vega - YouTube
https://www.instagram.com/st_vega_ - Instagram
https://www.tiktok.com/@stvega - tik tok
https://www.facebook.com/stvega1 - Facebook