Laboratory dissolver, mixer, Kirovohrad region.

We manufacture a wide range oflaboratory equipment for mixing and dispersing.
- laboratory dissolver-mixer, desktop, with mechanical lifting of the tool, with one bowl without a cooling jacket, the volume of the working chamber at the Customer's choice - 0.25, 0.5, 1 or 2 liters. (possible combinations), and engine power 0.37; 0.55; 0.75; 1.1; 1.5; 2.2; 3 kW., intermittent operation, with rotation control from 50 to 1000 or from 50 to 1500 or from 50 to 3000 (6000) rpm. min., using a frequency converter. It is made in general industrial (IP) and explosion-proof (Ex) versions. All parts in contact with the product are made of stainless steel. It is completed with one tool - a milling cutter, a stirrer of the propeller type, a frame, bells, a spring, etc. It can be completed with a cover if necessary. It is possible to manufacture additional interchangeable tools. It is possible to manufacture a dissolver with vacuuming of the product. One tank, with a volume of 0.5 to 2 x liters, without a cooling jacket and cover, is included in the equipment set.(//tractor-service.com)

- laboratory dissolver for the Customer's container, desktop or floor (for large buckets), with mechanical lifting of the tool, without a bucket - you can use a plastic cup or Customer's bucket from 1 to 20 liters or more (discussed in advance), with a universal mount, and a motor power of 0.37; 0.55; 0.75; 1.1; 1.5; 2.2; 3; 4 and 5.5 kW. with a voltage of 220 or 380 Volts. 50 Hz. (for Ex execution only 380 V.) Turn - from 50 to 1000 or from 50 to 1500 or from 50 to 3000 (6000) rev. min. The revolutions are regulated using a frequency converter. It is made in general industrial (IP) and explosion-proof (Ex) versions. All parts in contact with the product are made of technical (AISI430) or food grade (AISI304) stainless steel. It is completed with a frequency converter, a universal clamping device and a milling cutter or one other tool - a butterfly stirrer, a frame, a bell, a spring, or others. Can be equipped with a cover forcapacity Customer. It is possible to manufacture additional interchangeable tools. It is possible to manufacture a dissolver with vacuuming of the product. The tank is not included in the set of equipment, but it can be made in agreement with the Customer with a volume from 0.5 to 20 liters and more, both with and without a cooling jacket.