Продам Борона зубова шлейфовая БЗШ-14, Днепропетровская обл.

Борона зубова шлейфовая БЗШ-14 напівпричина ( причипна) . Державна компенсація 25-40% . Виробництво. Гарантія. Доставка по Україні
Harrows tooth Polefova BZSh-14 width of 14 meters of plumes in 16 rows of teeth. The boron of the tooth BZSh-14 is intended for early spring closure of moisture, soil alignment, preparation of fields for sowing, steam care. The harrow of the plumifova is partially state compensation for up to 40%. The main focus of work of the plume tooth harrow BZSh14 is the creation of a uniform loose soil layer; reduction of moisture evaporation; partial destruction of weed stairs; destruction of soil crust; laying of mineral fertilizers;
winter grain treatment at high speeds; closure of soil herbicides; harrowing of winter and crops; plowing.
Technical characteristics of the harrows of the bzsh -14
Тип Напівпричіпна
Processing width is 14.1 m
Потужність трактора від 260 л. с.
Working speed is 8-15 km/h
Processing depth 4-9 cm
45 ° attack angle; 67 ° (// tractor-service.com)
Number of series of teeth 16
Transport width 4.3 m
The mass of kg. 5000
Features of tooth harrows plume (heavy) BZSH are the following structural and technological solutions, which can significantly increase reliability and work resource, also improve repair.
= • The tooth is made of a square of steel 65g with appropriate heat treatment. The use of a square of milling on two sides on a sharp wedge, provides the work of the cutting face of the square and the wedge of the work surface with the effect of self -renishing. A sharp wedge easily penetrates the soil.
?
• links that collect load -bearing bars in the loop are made of strong sheet boss steel brand 30g2p used for Manufacturing of discs= Borin, paw. Also, the frame design of the link gives the plume stability when working without demolition should be in the trail. Fastening of the link to the tooth beam with the help of volume axes significantly increases the repair capacity of the site.
• stamped from sheet steel stops mounted on the tooth beam provide the required angle of installation of teeth (23 ° or 45 ° from the vertical). • The layout of the teeth at the intersection of the distance of the adjacent teeth 25 mm and the diagonal of the square 22 mm provides almost complete overlap of the work area over the entire width of the grip when the plume is made consisting of ten load -bearing bars with teeth. • Carrying frame allows you to install additional capacities and systems to apply the necessary chemicals and fertilizers.
• Схема розташування зубів при межосевом відстані сусідніх в плані зубів 25 мм і діагоналі квадрата 22 мм забезпечує практично повне перекриття робочої зони по всій ширині захвату при конструкції шлейфу, що складається з десяти несучих брусів з зубцями.
• Несуча рама дозволяє встановлювати додатково ємності і системи для внесення необхідних хімікатів і добрив.
= .| certain 191