Crushing peanuts. Crushing nuts into small fractions. Crushing machine, Kyiv

NPP Service Pak.
The crushing and cutting machine with a feeding dosing feeder and adjustment of the resulting fractions of the initial product is intended for crushing food products into different fractions of 2 mm or more, with the lowest percentage of flour.
The crushing and cutting machine is used in the confectionery industry mainly for crushingpeanut kernels,hazelnuts,walnuts, cashews and similar products.(//tractor-service.com)
The size of the fraction is regulated by the rotation of the handwheel, which is located on the back wall of the machine.
The set fraction can be adjusted even directly during the operation of the machine.
It is recommended to use the crushing and cutting machine complete with vibro-calibration sieves, with two or three predetermined sizes of fractions (For example: 2mm.; 4mm.; 7mm.;) This will greatly facilitate the separation of the resulting product into fractions. It is possible to install a frequency regulator on the machine, which can increase productivity and allow this equipment to work from a 220W electrical network. At the Customer's request, the sieve can be equipped with an aspiration unit with a cyclone to remove husks, light particles, and impurities.