Sprayer for field crops OPP-2000/18
(tank-2000l,
pump – 133 l/min Italy, boom 18 m mechanical folding (Poland), lift on the 1st hydraulic cylinder, 3-section pressure regulator, boom installation height: 0.5-1.8 m, Italian-German equipment,
tires 9.5 R 32 )
There is also a trailed sprayer with a tank of 2000 l, 2500 l, 3000 l and a hydraulic boom on two hydraulic cylinders with a lift of 18, 21, 24 m (Producer):
All sprayers are equipped with Italian equipment from Arag, Lechler, Imovilli pompe (control panel, nozzles, hoses, reinforced hubs, filters, pumps). They are delivered in an assembled state complete with a cardan shaft.
(//tractor-service.com)
The tank of the sprayer of Ukrainian or Polish production has a convex shape for complete emptying of the liquid with stable operation of the pump
pump, a partition is placed inside the tank for the strength and reliability of the tank.
The sprayer rod is developed and patented by the manufacturer, fully hydroficated (parallelogram mechanism) with a vertical frame, stabilization mechanism, support brackets. They have an effective attachment mechanism, in which the vibrations of the sprayer in the vertical plane turn into vibrations of the rod in the horizontal plane, thanks to which high uniformity of processing and high reliability of the rod are ensured.
The boom of the sprayer of a volumetric design, raising and lowering, folding and unfolding is carried out with the help of a hydraulic system from the tractor cabin. Fixation of the position of the rod in the unfolded state is carried out with the help of hydraulic locks
Plates of material with a very low coefficient of friction are installed on the rod in places where it can be worn.