Modular
grain dryers with a cooling system that allow you to save on processing as they do not require separate actions for grain cooling. After which it can be immediately shipped to a
silo or a bunker or to a car for further shipment
Production volume from 20 tons for individual farm enterprises to 100 tons per hour
Accordingly, for these volumes, we will select for you transport equipment that comes separately and not in the basic configuration.
The modular grain dryers of our production are more efficient than their counterparts due to the presence of a built-in grain distributor to which you
feed grain through a noria. The grain distributor gradually distributes grain throughout the bowl.
fuel burners for each fan, which allows even a single-module dryer to be used more efficiently than if it were equipped with one.
fuel burner, which would reduce the possibility of drying the lower layer of grain, which, when poured into the drying bowl, dries more slowly in similar models of other manufacturers, which are equipped with only one fuel burner for one of the two fans.
Due to the well-defined distance of the walls of 30 cm, the layer of grain culture that is in the drying stage is gradually dried completely in a short period of time without causing damage to the grain.
External sieves are alumino-zinc metal (more resistant to corrosion), internal sieves are galvanized steel in the basic configuration (it can be changed at the request of the client, which will accordingly change the cost of the equipment)
The grain dryer is equipped with a conveyor for 100 tons per hour
(//tractor-service.com)
You can use the supply system at :
to start
Natural gas
Diesels
Propane
The technical characteristics of the grain dryer allow you to use the grain dryer in a closed circuit even with a significantly moistened crop and in the presence of additional transport equipment. That is, to carry out repeated drying in a circle of the same crop without spending time on its aging. Since this modular grain dryer allows you to adjust the temperature, the grain at the bottom before entering the conveyor cools due to the operation of the fan to reduce the temperature and cool the culture.
In the standard installation of the grain dryer, the following equipment is used for its operation:
Two norias of the appropriate volume of production, one for loading into a grain dryer, the other for loading from a conveyor into a bunker, silo or transport
Scraper conveyor additionally for a closed circuit of re-drying or redirection of finished products to the noria, etc.
Silo or bunker