Trailed water-filled shredder roller (KIR-6), Poltava region.

Trailed roller chopper water-filled cutting machine (KIR-6) hydrofed. The roller is intended for grinding plant residues after sunflower, corn, stubble, leveling and partial mulching of the field surface.Roller shredder crop residues is a special equipment that with minimal labor costs will turn harvest residues, stubble and straw, into a homogeneous, thoroughly mixed with the upper layers of the soil nutrient layer. During autumn and winter, the crushed green mass will rot and only increase soil fertility, which will have a positive effect on future productivity.
Distinguishing features:
• at the expense of own transportwheels allow to quickly move from field to field and over considerable distances;
• due to the optimal distance between the chopper knives of 18.5 cm, the knives do not clog with wet soil.
• due to the diameter of the roller, which is 584 mm, as well as the high working speed of 12-20 km/h. the processed area increases;
• due to the reliable and tested frame KZK-6, the service life and reliability of the rink increases.
we put a maintenance-free bearing unit with agricultural sealing from FKL
Thanks to the built-in silent block in the housing, the bearing assembly withstands three times the compensating forces of the impact. Additional protection with a rubber ring is worth it.
The bearing unit is protected against water, ultraviolet, abrasive material and other factors that have a negative impact on the bearing.
Features:
Productivity 7.2 ha/hour
Working speed up to 12 km/h
Transport speed up to 20 km/h(//tractor-service.com)
Working width of capture 6.0 m.
The diameter of the roller is 470 mm.
Number of rollers 3 pcs.
The number of cutting knives is 120 pcs.
Overall dimensions, m:
– in working position (L/W/H) 3.45x6.0x1.0
– in transport position (L/W/H) 4.75x2.3x1.6
Unit weight 1900 kg - WITHOUT WATER
WEIGHT WITH WATER 2100 KG.
Powertractor (not less) 80 hp.
Trailer type

HOME DELIVERY IN ALL REGIONS OF UKRAINE! NO PREPAYMENT!