SUPN-8 m seed drill SU-8 precision seed drill. 1 YEAR WARRANTY! DELIVERY TO UKRAINE! The SUPN-8 m seed drill, which is easy to operate and maintain, is a unique unit used in the private sector and farming. It greatly simplifies the work on sowing different caliber and selected seeds by dotted method. Along with the sowing of seeds, at the same time, fertilizers with minerals are applied to the soil (separately from grains). After that, the furrows are sprinkled with earth and pressed down.
The SUPN-8 m seeder is used for sowing work in any, even the most difficult climatic zone. Exceptions are areas with rocky terrain and stony soils. The seeder belongs to the spring equipment and it can be attached to such types of tractors as 1.4 YuMZ and MTZ tractor. At the same time, the power of the tractor must be at least 60 hp.
In the device of this model, new technologies are introduced and a control system is installed, which allows you to track the amount of mineral fertilizers and grains in the hopper and the entire work process. The seeder weighs 1180 kg. The depth of seeding is 40-110 mm, and the sowing rate is 25-150 thousand pieces per hectare. Its working speed is high - 5.4-10 km per working time. There can be six or eight sections in it, and depending on this, its width of capture will be - 4.4 meters or 5.6 meters of soil. The unit is simple to operate and maintain, and it is easy to set up and keep under control during agricultural work on sowing seeds.
The SUPN-8 m seeder is part of the SPU line, but it is a more advanced unit in which the following changes were made to the design:
• reinforced frame located in a trailer or suspension device; improved chain drive;
• new rotary fan;
• drive gears made of hardened iron;
(//tractor-service.com)
• rolling
wheels with installed bearings;
• plastic bunkers;
• bumper made of
rubbers;
• a chain covered with a plastic cover;
• adjustable angles of marker disks.
The seeds are sown in 6 or 8 rows, and the width between the rows is 70 cm. The transmission mechanism, which is set in motion by the supporting wheels of the seeder, transmits the movement to the disks and spring augers, which are seeding mechanisms. A vacuum is created in the lid cavity, and the seeds go to the holes on the disk, enter the intake chamber and the zone, from where they are thrown into the grooves one by one. After that, they are covered with soil with the help of wrappers and pressed down with
wheels. You can place an order and buy a SUPN-8 seeder in our company and in any other populated place of our country at the manufacturer's price and very convenient service.
DELIVERY TO YOUR HOME WITHOUT PRE-PAYMENT!