ZhSN rowless sunflower harvester -4m/5m/6m/7, 4m/9m, Kherson region.

New sunflower harvesters ZNS TELEPHONE +79900265592 .0506139169 (viber)
The width of the reaper is 5 m. ZhSN-5, ZhSN-6, ZhSN-7,4, ZhSN-9
9m reapers availableSunfloro ZhS-8.5, ZhS-9.5, ZhS-11.3 m
* Rowless harvesters. They can be used in any direction.
* Harvesters do not load the harvester thresher with excess leaf-stem mass. They cut only sunflower baskets. It does not depend on the height of the reaper.
* Harvesters are highly productive. They are high-speed, combined with a large width of capture.
* Reapers practically do not knock the seed out of the baskets. Because they affect not the basket itself, but the stem of the sunflower. And the stem slides down to the cutting apparatus.
- The harvester picks up only sunflower baskets.

Reapers Sunflower harvesters. Corn harvesters. Rapeseed table. Attachments for sunflower, soybeans. Carts for harvesters.
Sunflower harvester UNICORN SUNSPEED
Rowless harvester, analogue of Zaffrani.
UNICORN New-6m
UNICORN New-7.4 m
UNICORN New-9.2m-12m
Sunflower harvester PRIMERA-6 / 7.4 / 9.
Sunflower harvester ZhSN-6 / 7,4 / 9,
The equipment cuts sunflowers under the basket. The clogging of the bunker turns out to be less than one percent. The leaves remain on the ground without falling into the bunker.
The auger is protected by a safety clutch.
Harvesters are available in different configurations.
It is possible to install the Pro-Drive 85MVv GKF cutting device manufactured by the Schumacher plant (Germany).
The reliability and quality of the harvester, confirmed by years of work, puts it on the first place in the agricultural machinery market.
UNICORN SUNFLOWER HARVEST
DISTINCTIVE FEATURES,
TECHNICAL IMPROVEMENTS AND IMPROVEMENTS
FRAME: improvement of the frame design allowed to increase it(//tractor-service.com)
strength and stiffness. Corrected angles and mutual distances
arrangement of load-bearing beams and finger beam. Reinforced braids were tied together.
the frame at critical points, thereby providing minimal static
deflection of the frame as a whole. Many small pods are replaced by sheet parts.
of complex configuration, manufactured on a high-precision imported machine.
CNC equipment. This reduced the total number of welds by 200
внутренние напряжения от сварки в элементах рамы.
SCREW: the design of the screw is reinforced with additional partitions, in
in the form of rolled plates, and elongated support coils. The auger is protected
with a safety friction clutch, which is installed on the spline.
of the shaft and limits the torque on the auger in the event of stones hitting и
other extraneous objects into the ego's work area, thus protecting everything
rotating parts from overloads and destroyed.
REEL: the weight of the reel is reduced by 70 kg. due to the use of the pipe
larger diameter, while its rigidity has increased. Long shafts
replaced with trunnions, which added strength to the structure and increased its life
exploitation The reel is equipped with feed fingers serving
for active cleaning of the working space between lifters from clogging
masses.
From above, the auger is closed with shields with a diameter of 214
штампованных отверстий 3мм, которые
they prevent mass transfer through the auger and
reel, and also serve to provide
safety of personnel in the process of work
The product is certified. Phone +79900265592 t.0506139169 (viber)
Warranty 24 months.
Delivery!!!