The Good Luck GL4300BC chainsaw is designed for mowing all types of grass (in including wet grass, dry ground), shrubs, tree shoots. Fishing line and steel cutters are used as a cutting tool. A threaded head (1 pc. in the set) is used for cutting grass, and a 3-tooth cutter (1 pc. in the kit) is used for cutting hard grass and shrubs. You can use this brushcutter as a
scrub cutter - for this, 40-tooth and 80-tooth cutters are used (purchased separately).
The two-stroke engine has a sufficient margin of durability and reliability. The maximum power of the engine is 3.5 hp. at a maximum speed of 6500 rpm. The carburetor of the Japanese manufacturer Walbro is installed on the engine, which guarantees reliable and smooth operation of the engine. The clutch is centrifugal with sintered pads, which ensures a long service life and high wear resistance. The forged shaft and connecting rod guarantee long-term operation of the Goodlak GL-4300 motor mower. Shoulder straps evenly distribute and reduce the load on the operator's hands. Self-lubricating bearings on the transmission provide a minimal vibration level.
Attention! Be sure to read the operating instructions. Be sure to run-in the engine before commissioning.
You can buy a Good Luck GL4300BC motor mower for a summer house, garden, park, alley by placing an online order on the website or by calling the contact numbers. GoodLak chainsaws - reliability, safety and high productivity!
Technical characteristics:
Class: semi-professional
Engine: single-cylinder 2-stroke 1E40F-5A
Power: 3 kW/3.5 hp.
Cylinder volume: 42.7 cm3
Fuel tank volume: 1.2 l
Carburetor: Walbro (Japan)
(//tractor-service.com)
Gearbox made in Japan
Bearings: self-lubricating
Shaft and connecting rod: steel, forged
Starter: manual with suction.
Max. revolutions: 6500 rpm
Cutting tool: fishing line/disc
Bevel width, fishing line/disc: 41.5/25.4 cm
Line feed: semi-automatic
Bar length: 165 cm
Fishing line diameter: 3 mm
Fuel mixture:
gasoline AI-92 + oil for 2-stroke engines
Weight: 8 kg
Production: Good Luck, Germany
Complete set: scythe, two-handed "bicycle" handle, protective cover, cover insert for the threading head with a thread-cutting knife, double-shoulder belt, 3-toothed steel disc - 1 pc., threading head - 1 pc., tank for the fuel mixture, fasteners for mounting the protective cover on the scythe, combination key, fixing pin, screwdriver, instructions for operation