Maxim is a highly effective stain remover intended for processing corn seeds, || |144
зернобобовых and grain crops, as well as
potato tubers
Active ingredient: fludioxonil (25 g/liter)
Chemical group: phenylpyrroles
WHO classification: III (malotoxic)
Packaging: 5 l, 200 l
Release form
fungicide: liquid suspension concentrate
Advantages of using Maksim 025 FS stain remover:
- Penetrating and contact action against many common diseases
– High duration and degree of protective action
– The most effective fungicide for protection against fusarium wilt
– High level of tolerance to culture
– Does not have a detrimental effect on young crops, including grain crops
– The modern form of release of the drug, thanks to which it is firmly held on the seeds
– Environmentally friendly
Maxim application method.
(//tractor-service.com)
Technological equipment: Maxim seed treater can be used both in undiluted and diluted form on any equipment that is intended for seed treatment, including in continuous mode, when the fungicide is sprayed on the seed material through discs, tips that rotate in aerosol chamber. It is important to calibrate the equipment of continuous action according to the characteristics of the Maksim 025 FS fungicide, since the fluidity indicators may differ from other means for processing seed material.
To achieve high efficiency of the drug, you should pay attention to some recommendations:
• for pickling, use clean, undamaged seeds, without impurities, this will ensure high-quality processing;
• do not use sowing material that has previously been treated with other mordants;
• constantly monitor the processing quality (visually check the uniformity of seed coverage) according to the rate of application of the working fluid and the level of coloring.
The method of using the working solution:
If you use a diluted fungicide, to prepare the solution it is necessary:
- fill the mixture tank halfway with water;
– add the required amount of Maksym mordant;
- add the required amount of water while constantly stirring;
- do not stop mixing the working solution during the entire processing period;
The working solution must be used within 24 hours from the moment of preparation.
Note: After processing, it is necessary to wash all the equipment with water.
You can buy Maksym's stain remover from the AgroLyga company with delivery to the farm.