AVM peat-based inoculant is produced both on a sterile and non-sterile basis.
Application.
Pre-sowing processing of soybean seeds.
https://agro-himprom.com.ua/p683103463-inokulyant-dlya-soi.html
Advantages.
- contains a unique set of three patented strains.
1. AVM 201 strain for wet and cold climates;
2. AVM 202 strain for cold and hot soil conditions;
3. AVM 203 strain for soils with a low humus content
- provides the soybean plant with nitrogen in the amount of 300-350 kg/ha;
- increases soybean yield by 5-10 centners per hectare.
AVM inoculant based on sterile peat is a product tested by time and adverse conditions.
advantages:
Adapted to different types of soils and climatic conditions.
Provides high yield at low costs per hectare.
Economically justified, fast and simple application.
(//tractor-service.com)
characteristic:
Packaging: box (10.63 kg), in a box 5 bags of 2.126 kg.
Consumption rate: 1.87 kg per 1 ton of seeds.
Number of bacteria: Bradyrhizobium japonicum not less than 3x109 CFU / g of the drug.
Instructions for use:
An inoculant based on sterile peat is applied to the seeds by dry inoculation during the seeding process in the
planter, thoroughly mixing until the surface of the seeds is completely covered. Does not require additional wetting, as it contains an adhesive agent
прилипатель.
Instructions for use.
An inoculant based on sterile peat is applied to the seeds by dry inoculation in the process of filling the seeds in the planter, and on a non-sterile basis, it requires moistening the seeds with non-chlorinated water for better adhesion to soybean seeds. Water is added at the rate of 100 ml of water per 25 kg of seeds. Avoid direct sunlight when processing seeds. Use at temperatures from +4°С to +25°С.
Soybean seeds treated with a peat-based inoculant must be sown in the soil within 24 hours. Otherwise, it is necessary to apply repeated processing.
Under unfavorable conditions, namely:
- in the absence of legumes in the field for more than 3 years;
- at soil pH higher than 8.5;
- with drought, high humidity, soil temperature above +27°С
- in the case of soil erosion with chemical preparations, use a double rate.