Motoblock Cultivator Active tiller Sadko Centaur Veyma, Ivano-Frankivsk region.

Найбiльш ефективний вид технiки для обробки вашої дiлянки.
The principle of operation consists in the simultaneous operation of wheels and cutters, which allows for high-quality cultivation of even previously uncultivated land. Such a walk-behind tractor is practically self-propelled.

A great advantage of this technique is the possibility of simultaneous cultivation and plowing.

We offer a choice of three models with an active cutter with a power of 7 hp.

Sadko M-400, Centaur MB 40-1C and WEIMA WMX 650 Deluxe

Motoblock WEIMA WMX 650 DELUXE

Free address delivery in Ukraine
WMX650 is equipped with an active milling cutter, on which sets of milling cutters are installed (both forcontinuous processing 65 cm and for inter-row processing - 24 cm); with pneumaticwheels 4.00-6 and narrow ground grips, weight 110 kg.(//tractor-service.com)

The walk-behind tractor is equipped with a gasoline engine WM170F-l with a gearbox, a belt clutch. The reducer of the wheel drive, like the reducer of the drive of the active milling cutter, is chain-type, fully collapsible. The gearbox has 2 forward and 2 reverse speeds. The active cutter also has 2 speeds. The drive to the milling cutter is carried out through a gear adapter, which can be unfolded, changing the gear ratio.

The steering wheel turns 180 degrees. Standard soil plugs will practically not leave traces on the treated soil. The motoblock can also work without an active cutter, in this case cutters are installed instead of wheels. It is also possible to install a hiller instead of a supportingwheel cutter. In this case, two operations are carried out at the same time: saving fuel and preserving moisture in the soil (the soil does not dry out during the period of time between milling and hilling).

The WMX650 motoblock is designed for full processing of 30-100 hectares of land, but its main advantage is inter-row processing. WMX650 is the kind of equipment that will work in the garden from early spring to late autumn, and will greatly facilitate your work. The processing quality will surprise even experienced gardeners. Practically all operations for changing and adjusting inventory are carried out without tools.

The motoblock is equipped with the usual "L"-shaped handles, due to a change in the configuration by the manufacturer.

Sadko M-400 is a time-tested model with 6.5 hp, a cultivation width of 400 ml, with a protective cover and 2 forward and 1 reverse gears.

Centaur MB 40-1C - improved 2017 model. It is a complete analogue of Sadko, but already with a 7 hp engine. and the cultivation width is 400-700 mm.

There is also a lot of other equipment, cultivators, walk-behind tractors, attachments, adapters, sprayers, etc.