Equipment for wrapping doors, windows, sills, furniture panels, window sills in film Kyiv

The line is intended forpackaging in a heat-shrink film to protect against moisture, mud, dust of oversized products such as doors, furniture shields, wooden paneling, door panels, artificial marble countertops, sets of door blocks, sets of floor coverings, etc.

Composition of the line:
Feeding roller conveyor (1)
Transverse film sealing unit (2)
Roller conveyor with longitudinal fasteners (3)
Thermal tunnel (4)
Conveyor roll conveyor (5)
(//tractor-service.com)
Job description:
The product is placed on the feeding roller conveyor (1) by two operators. The conveyor (1) is equipped with guides that center the product for passing through the transverse film-sealing unit (2). At this stage, a label can be placed on the product.
Next, the operators move the product through the film from the roll holders (2.1), the transverse film sealing unit (2), to the roller conveyor with side sealers (3). After the complete movement of the product outside the installation (2), one of the operators presses the button on the control unit (2.2) and the sealing traverse (2.3) forms a transverse seam of the beam package. In one lowering of the traverse (2.3), the transverse seam of the packaging of the product is formed, the packaging film is cut from the roll and the seam is formed connecting the film web with the rolls.
On the roller conveyor with side sealers (3), the operators each on their own straighten the film and place its edges under the seal traverses (3.1), which are located on the sides of the conveyor rollers (3). Control of the lowering of each traverse (3.1) and the formation of longitudinal welds is carried out on its own control units. After the formation of the seams, the operators remove the fogs formed during the welding process.
At the end of the formation of the longitudinal seams of the package, the product is moved to the drive chain conveyor, which is part of the thermotunnel (4), and passes through the thermotunnel. Shrinkage of the film occurs in the thermal tunnel.
From the thermotunnel (4), the packaged product is fed to the discharge roller conveyor (5), on which the deposited film is cooled by the flow of air from the fan.
The packaged product is delivered by operators.

Isolation according to the customer's individual requirements.
Warranty 12 months.