Seeder plow (similar to SUPN 8) with a transport device, Kirovohrad region.

Seeder plow (analog SUPN 8) with transport device,

Characteristic features:
- Sowing sections with a drive on bearings, drive sprockets stamped and welded, drive chains with a pitch of 15.875
- Fat reducer on bearings, gears of the fat reducer are stamp-welded (metal) hardened with galvanized coating.
- Receiver frame (the discharge goes along the frame beam - 60 x 60 mm).
- Hydrated marker system (each marker on an individual hydraulic cylinder, without cables)
- A fan of a new model, working directly from the power take-off shaft through the cardan shaft, (max. revolutions of the cardan - 540 rev/min. (analog UPS).
Factory warranty - 1 hour.
Basic equipment SUPN-6M and SUPN-8Mdiscs for sowing various crops.
Sown culture Hole diameter, mm Number of holes, pcs. Number of disks, pcs.
Sunflower 3 14 6/8
Corn 5.5 14 6/8
Indicators of SUPN-6M SUPN-8M
The type of machine is a mounted mounted machine.
Gripping width m 4.2 5.6
Number of rows pcs 6 8
Width between rows mm 450, 700 450, 700
Working speed Km/hour 2.5-9 2.5-9
Productivity Ha/h 1.05-3.78 1.4-5.04
Hopper capacity (total)
- for seeds Dm3 150 200
-for fertilized Dm3 192 192(//tractor-service.com)
Sowing norms
- for seeds Pieces/p. m. 4-25 4-25
- for fertilized Kg/ha 50-250 50-250
Seed sealing depth mm 40-120 40-120
Overall dimensions
- in working position mm 1700*4900*1600 1700*6250*1430
- in transport position mm 5450*2300*2360 6800*2300*3010
Mass Kg 1074 1278
It is aggregated with tractors L. p. Ot65 80
The seed drills are equipped with a durable hydroficated marker with a disc of a larger diameter, which has the ability to change the angle of attack to obtain a clearly visible trace.
To order, the planters are equipped with a transport device, which allows you to move it along general purpose roads without the use of additional means of transport.
The seeder is equipped with a centrifugal fan driven by the tractor PTO 540 rpm.
For guaranteed retention of heavy leguminous seeds (soy, etc.) on the holes of the seeding discs, the fan of the seeder is equipped with an additional air outlet.
There is a flap on the fan to regulate the discharge of the air flow.
The fan is equipped with an overrunning clutch that protects the belt transmission from increased wear.
The frame of the seeder acts as a receiver, which ensures the same vacuum in all seeding devices and eliminates the pulsation of the air flow.
The sowing section of SPU6M and SPU8M is equipped with a coulter for sowing corn and sunflower seeds. The parallelogram section provides better copying of the relief of the field. The amount of seeds that falls from the hopper into the seeding chamber is regulated by a shutter.
The presence of a viewing window allows visual control of the quality of the seeding device during the adjustment process.
An unloading hatch is provided for quick removal of seeds from the chamber of the seeding device.
An unloading hatch is provided in the bunker to remove the remains of mineral fertilizers.
The compacted soil in the sown rows improves the contact between the seeds and the moist soil at the bottom of the furrows, provides capillary rise of moisture and creates favorable conditions for earlier and friendly seed germination. Gas exchange is carried out thanks to open zones.
Precise seed drills ensure sowing at the final density, excluding the use of manual labor when forming the required interval between plants.
Pneumatic sowing devices of precision sowing seeders reduce the percentage of seed crushing by 10 times compared to mechanical ones.