ShRT2 wood chipper, chipper, chipper, crusher, mounted on a tractor, Lviv region.

Main working body wood chipper has a single steel disk with a diameter of 800 mm. Two cutting knives are installed on the knife disk, and one counter knife is installed in the machine body. The raw material is fed into the hopper by a worker manually and with the help of a hydraulic feed system it is pulled into the working area.

Among the technical advantages of wood chipping machines, the following can be noted:
High productivity - up to 10.0 cubic meters per hour (6 tons per hour), depending on the type of grinding material;
Large volumes of wood shredding waste in diameter up to 160 mm, width up to 240 mm, any length;
Availability of a mechanism for supplying raw materials to the working area of the machine;
The possibility of hydraulically adjusting the size of the chip fraction at the exit from 10 to 30 mm;
Adjusting the direction and height of chip ejection from the chip pipe.

The wood-shredding machine is aggregated with tractors T-70, YUMZ-6, MTZ-80/82 (Belarus) and others of a similar power class. The machine is mounted as a mounted unit on a 3-point hydraulic tractor hitch. The machine is driven from the take-off shafttractor power through a cardan transmission.(//tractor-service.com)

Disk rotation frequency, rpm - 1000
Wood supply speed, m/s - 0...0.3
maximum productivity, cubic m/h - 10
The height of throwing raw materials, m - 3.0
Overall dimensions:
length, mm - 1700
height with pipe, mm - 2500
height without pipe, mm - 1700
width, mm - 1500
Weight, kg - 700