Rotary mower KR-1.8 on T-40, YuMZ, MTZ, Dnipropetrovsk region.

Berdyansky "Oylenergomash" plant manufactures the KTR-1.8 three-rotor mower.
The KTR-1.8 rotary grass mower is intended for mowing sown and natural grasses with the laying of the mowed mass both in the spread and in the swath. Grass mowing is carried out with the help of three rotating knives installed between the upper and lower discs on three rotors.
Suitable for communal households, for mowing roads, territories.
The mower aggregates with tractors MTZ-80 / 82, YMZ-6L, YMZ-6M, T-40.
For mowing in the spreading direction, the direction of all three rotors is clockwise (when viewed from above). When mowing in the swath, the direction of rotation of the third rotor is counterclockwise (for which the V-belt between the second and third rotors will be reset to the cross position).
The mass of the structure is 180 kg.(//tractor-service.com)
The width of capture is 1.8 m.
Productivity in 1 hour is 1-1.5 ha / h.
The minimum cutting height is 40+ / -10 mm.
The mower is delivered by the manufacturer fully regulated and ready to work. For
to check the assembly and adjustment, it must be run-in. Running-in takes 30 minutes. at minimum revolutions.
The manufacturer is not responsible for the operation of themower in case of non-compliance by the User with the rules of operation, transportation, maintenance and storage, installation of parts and assembly units on the mower that are not provided for in the manufacturer's documentation, as well as when the User makes changes to the design of the mower that are not agreed with the manufacturer Oilenergomash. our site oylenergomash.com.ua
Call the sales department from 8 a.m. to 5 p.m.