Grain loaders (grain thrower) type ZM (60/80/90/100), Chernihiv region.

Zernopogruzchiki self-propelled type ZM - 60 / 80 / 100 are excellent assistants at grain warehouses and grain stores.
Grain loaders perform the following technological operations:
 loading and unloading of grain from grain warehouses;
 loading of grain into vehicles;
 mechanical shoveling of grain on open platforms;
 formation of sidewalls from grain;
 grain loaders can transfer grain over a distance.
Features of ZM type grain loaders - 60 / 80 / 100:
I. It is possible to rotate the trimmer by 135 degrees in both directions from the longitudinal axis of the frame. This provides:
 continuity of loading process;
 loading grain into road trains;
 uniform distribution of grain when loadedstorage;
 formation of edges with one ridge after two passes of the trimmer;
 distribution of grain from the side for drying to the current platform and its formation in the side after drying.
II. Improved trimmer:
 computer balancing – ensures noiselessness and smooth rotation of the drum;(//tractor-service.com)
 an increase in the flight distance of grain from the ejection point, both grain and oil crops, which allows grain to be thrown from 18 m;
 increased loading height by raising the trimmer upwards relative to the standard version, which ensures smooth loading of trucks with extended sides (loading height at least 4.6 m).
III. A distinctive feature of these loaders is the installation of a differential after the gear reducer, which serves to transmit the torque from the gear reducer to thedriving wheels, thanks to which, the maneuverability of the loader increases and the wear of the gears of the gear reducer decreases.
IV. An additional travel reducer with a satellite block is installed, which:
 makes it possible to use the transport speed in loading and unloading operations due to the reduction of the gear ratio by 2.5 times;
 with the help of a satellite unit, the maneuverability of the grain loader improves and the service life of the front and rear gears increases;
 removes the load on the front gear (steering wheel);
V. The absence of half-coupling wheels simplifies the operation of the grain thrower;
VI. The installed lighting device makes it possible to work in the dark;
VII. The use of reinforced chains on conveyors increases their service life.

We hope for fruitful cooperation!
Sincerely, Alexander.
Phone: +38(096) 156-45-79
Tel.: +38(066) 797-54-77
http://agrotopmash.com/