Forage grinder Ikor-4, grain, Kyiv

Designed for grinding: wheat, rye, barley,corn andother grain crops. The principle of operation of the grinder is based on breaking the grain with hammers and pushing it through a sieve. The set of replaceable parts includes a sieve with 3 mm holes for obtaining a finer grinding fraction. Hammer-type knives have a complex geometric shape of the cutting blade, which allows them to significantly extend their service life.Forage grinders IKOR have design advantages: They are equipped with a protective relay. The machine will timely turn off the electric motor in emergency modes of operation, excluding the possibility of its breakdown. The limit switch prevents the grinder from being turned on when the front wall is removed during maintenance of the grinding mechanism. The block of the hammer-type grinding mechanism is made of high-strength structural steel, which significantly reduces the load on the engine and increases the service life. The circular arrangement of the sieves ensures high grinding quality. In the basic configuration, a sieve with a diameter of 4 mm is supplied for obtaining the average grinding fraction. Closed-type bearings are installed in the grinder, which do not require relubrication. The body of the shredder is painted outside and inside with durable powder paint.
Power, W 1350 Weight, kg 14 Productivity kg/h grain 150 Asynchronous single-phase capacitor motor Frequency of engine revolutions, rev/min 3000 Voltage/frequency, V/Hz 220/50 In addition, long-term operation mode, grinder body - steel; hammers - structural stainless steel; loading hopper - steel, thermal flow relay PTT-2; limit switch. Overall dimensions, mm 522х310х335 Warranty period 12.