Rape harvesters Rapeseed table. Attachments for sunflower PS-4 (5, 6, 7, 8), .Sunflowers reapers, Poltava region.

ЖАТКИ для уборки подсолнечника from 5m to 12m.
Trailed roller reapers ZhVP-9,1 ZhVP-6,4, ZhVP-6, ZhVP -6 (Schumacher drive) ZhVP-5.2, ZhVP-5.1 (with Schumacher drive) ZhVP-4.9, ZhVP-4.9 (Schumacher drive)
ZHVN-6, ZHVN-6 (Schumacher drive), ZHVN-6-01, ZHVN-6-02, ZHVN-6-03 ZhZB-4.2, ZHRB-4.2, ZHBV-4.2, ZHBV-5
Universal roller harvesters ZHVU-4,2, ZHVU-5,1, ZHVU-6, ZHVU-5,1 (Schumacher drive)
Direct combine harvesters Don (6m, 7m), Niva (4m, 5m)
Rice harvesters ZRV-4,2, ZRV-5
Rapeseed table PR for harvesters of domestic and imported production.
Pickers PDE-3,4, PPT-3A for domestic and imported combines (Don, Niva, Case, New Holland and other 86 models)
Mowers KPO-2.1, KPN-2.1 for tractors MTZ-80, YuMZ, T-16, etc.
Attachment for harvesting soybeans and legumes. (Flex)
Attachment for harvesting sunflower PS-4 (5,6,7,9) for all combines.
VTZ trolleys for transportation to harvesters.
Augers for harvesters.
Spare parts for harvesters, mowers, harvesters, rapeseed tables, sunflower and soybean harvesting equipment (Assortion).

UNICORN SUNFLOWER HARVEST
DISTINCTIVE FEATURES,
TECHNICAL IMPROVEMENTS AND IMPROVEMENTS
FRAME: the improvement of the frame design allowed to increase it.
strength and stiffness. Corrected angles and mutual distances
arrangement of load-bearing beams and finger beam. Reinforced braids were tied together
the frame at critical points, thereby providing minimal static(//tractor-service.com)
deflection of the frame as a whole. Many small sub-nodes are replaced by sheet details.
of complex configuration, manufactured on a high-precision imported machine.
CNC equipment. This reduced the total number of welds, reduced
internal stresses from friction in frame elements.
SCREW: the design of the screw is reinforced with additional partitions, in
in the form of rolled plates, and elongated support coils. The auger is protected
with a safety friction clutch, which is installed on a spline.
of the shaft and limits the torque on the auger in the event of stones hitting и
other extraneous objects into the ego's work zone, thus protecting everything.
rotating parts from overloads and destroyed.
REEL: the weight of the reel is reduced by 70 kg. due to the use of the pipe
larger diameter, while its rigidity has increased. Long shafts
replaced with trunnions, which added strength to the structure and increased its life
exploitation The reel is equipped with feed fingers serving
for active cleaning of the working space between lifters from clogging
masses.
From above, the auger is closed with shields with a diameter of 207
штампованных отверстий 3мм, которые
they prevent mass transfer through the auger and
reel, and also serve to provide
safety of personnel in the process of work
All production is certified. 2 year warranty.
Delivery.