Sparchan (scraper) ABELE, Volyn region.

Buy scrapers, scrapers, scrapers
The ABELE scraper (scraper) with an auger is intended for high-quality and quick cleaning of pig carcasses from bristles.

Combined scrapers (scalping-hair-sweeping machines) have a compact design, are equipped with built-inwheels for easy movement around the room, which can be climbed with the help of a special device or a built-in elevator, so they are popular both in small farms and in largecattle slaughterhouses.

The water in the working bath of the scraper is heated with the help of stainless heating elements placed in an insulated oil jacket, or with the help of direct steam injection.

The scraper (sparing tank) is equipped with an additional device for cleaning hard-to-reach places of the head, which ensures high quality cleaning of the head of the carcass. Additional blades on the back wall of the spar machine provide better carcass cleaning.

Ejection of the carcass from the sparchan is performed by a lever with a manual (optionally pneumatic) drive, the lever raises the lower shaft or the rear grate (depending on the sparchan model), while the working shafts are automatically turned on, which greatly facilitates the ejection. The carcass is thrown, for example, on the desktop.

Technical characteristics:

Type
200 300 350
Cleaning cycle time: 3 - 5 min. 3 - 5 min. 3 - 5 min.
The maximum productivity of the piggery: from 12 to 18pigs per time from 12 to 18 pigs per time from 12 to 18 pigs per time
Maximum weight of pork carcasses: up to 200 kg up to 300 kg up to 350 kg
Heating power: 10 kW 12 kW 17.5 kW
Internal dimensions of the plow: 1800 mm 1900 mm 2200 mm(//tractor-service.com)
Engine power: 2.2 kW 2.2 kW 2.2 kW
Amount of water for work: 130 liters 180 liters 210 liters
Machine length: 2150 mm 2350 mm 2500 mm
Machine width: 1000 mm 1000 mm 1000 mm
Machine weight: 380 kg 570 kg 620 kg
All machines can be made of both stainless steel and galvanized steel.

Additional options:

Bristles built into the shards
Built-in bristle collector, with automatic spiral-type bristle ejector.
Enhanced heating 13.5; 17.5; 21 kW (for faster initial start-up of the machine, for work at high processing temperatures)
Wall-mounted version of the control unit (in a stainless steel case, with a digital temperature controller)
Pneumatic drive of the carcass ejector
Heating with low pressure steam (direct injection)
Execution "LUX":
Working shafts: stainless steel
Oil bath: stainless steel
Chain protection: stainless steel
Wheel lifting beam: stainless steel