KMS-6 corn harvester, Dnipropetrovsk region.

Corn harvester KMS-6 High-performance corn harvester combined with "Slavutich" grain harvesters , "Don-1500", "Vektor", "Enesey", "Akros", New Holland, CLAAS,John Deere, Case, Massey Ferguson, Top Liner, and etc. The harvester in the unit with the combine harvests ripe corn with the collection and subsequent threshing of the cobs, grinding and scattering of the leaf-stem mass on the field. Modifications of the harvester make it possible to aggregate it with almost all known grain harvesters.
The developed head part of the harvester also flawlessly picks up fallen corn, which allows to reduce losses and ensure high-quality harvesting. The simplicity of the design, the presence of hinged hoods, which are easily opened and fenced, make the machine reliable in operation and convenient in maintenance. Compared to devices for harvesting corn with the collection of leaf stalk mass (KMD-6, PZKS-6), it has a significantly smaller structural mass and energy consumption of the technological process, which allows to increase harvesting productivity by 15...20% and reduce fuel consumption. It is hung on the inclined cameras of harvesters and does not require modification of their drives of the harvester. Shredder knives located along the entire width of the machine's grip allow you to remove clogged corn crops.
The machine provides a sufficiently low cut and the quality of grinding corn stalks, which does not require additional costs when plowing the field after harvesting.
The belt drive of the stalk choppers provides greater reliability of work compared to the chain transmission. The working organs of the machine are protected by safety devices, which increases the reliability of the machine in operation, and the presence of hinged hoods, which are easily opened and fenced, provides convenience in maintenance.
The harvester is equipped with an alarm system that allows the harvester to monitor the progress of the technological process from the combine cabin. Modern design of nodes, automatic drive tensioning devices - advantages of this device.
KMS-8 - a high-performance harvesterfor harvesting corn is aggregated with "Slavutich" grain harvesters. "Don - 1500", "Dnipro - 350", "Top Liner", "Vector", "Enesey", "Mega", "John Deere", etc. Not universality is one of the main advantages compared to foreign analogues, which are aggregated only with certain models of combines (For example: "Kemper", "John Deere", "Klass")
KMS-8 harvests ripe corn for food and fodder grain with threshing of the cobs, grinding and scattering of the leaf-stem mass on the field.
Can be used as a skimmer when preparing corn fields for harvesting.
The harvester is equipped with an alarm system that allows the harvester to monitor the progress of the technological process from the combine cabin.
Modern design of nodes, automatic drive tensioning devices - advantages of this device
- compared to devices for harvesting corn from other manufacturers, it costs
I significantly reduce the structural mass and energy consumption of technological
of the process, which allows to increase cleaning productivity by 15-20% and reduce consumption
fuel
The machine provides a sufficiently low cut (100 mm) and the quality of grinding corn stalks, which does not require additional costs when plowing the field after harvesting. The developed head part of the machine reliably picks up fallen stalks of corn, which allows you to reduce losses and ensure high-quality harvesting(//tractor-service.com)
- the belt drive of stalk shredders ensures greater reliability of work compared to
with chain transmission. The working organs of the machine are protected by safety devices, which
increases the reliability of the machine in operation, and the presence of folding hoods that open easily
fenced provides convenience in maintenance
- changing the direction of rotation of the chopper knives, allows you to settle the chopped leafy stem mass into a roll
the harvester allows to increase the shift productivity of the combine by reducing the number of passes and turns when harvesting each specific field
when harvesting, it easily fits into the rows of corn sown with 8-row and 16-row seed drills
- the use of metal hoods on the KMS-8 harvester allows you to significantly increase its life
services MAIN TECHNICAL CHARACTERISTICS OF KMS-6 The number of removed lines 6
Row width, cm 70
Gripping width, m 4.2 5.62
Productivity, t/h 10-16
Mass, kg 2000
Overall dimensions in working position
(length/width/height), mm 3000/4370/2125