Press for the gap of fuel bikets €

Предлагаем пресс для производства топливных брикетов из отходов
древесины и соломы

Issue:
a) GRAN 500 500 - 800 kg/time on chip
b) GRAN 350 450 - 600 kg/time on straw

In the composition of ropes:
- briquetting press - 1 pc.;
- Sleeping reservoir with a disaster - 1 pc.;
- guide briquettes - 2 sets;
- control panel - 1 pc.

Technical description of the ropes on the permeation of fuel briquettes - Exhibited for the binding of the brickle without the submission the uses of the wooden departments (chips, offenses), as well as bread,
- используется для производства брикета без использования связующих (//tractor-service.com)
веществ из деревянных отходов (стружка, опилки), а также хлебной,
= rapeseed straw and the second departments that cellolose concluding in themselves (departments
из льна, хлопка, и тому подобное). Фракция используемого сырья, должна
выносить от 1 в 3 мм, а влажность 8-15%. Сырье не может быть
The following substations are soaked in: oils, slings, varnishes, paints, and
= Myneral tightness, such as foxes and therefore not liked
= prevail 1.5% from mass.

On the exit of the briquette, the cylindrical form with a diameter of 60 mm and at
= minonic plinn 30 mm. Teaching the nature of the work Extuder, то есть
циклическое проталкивание порций сырья, на выходе брикет являет собою
= Strongly sprayed segments of the long one from 4 to 6 mm. In the poignry with this
It is allowed to ego by the sake of segments. The length of the brickle is removed
Here is 30 in 300 mm. Energy is what is visible when the bicketer is fastened from
The proven suction and in the case MJ/kg.
МДж/кг.