Tegeron Styk Ecobit box 10 kg sealing frost-resistant non-hardening mastic, Dnipropetrovsk region.

Tegeron Styk Ecobit box 10 kg sealing frost-resistant non-hardening mastic DSTU B V.2.7-106-2001 Universal, sealing, non-hardening, frost-resistant mixture based on synthetic rubber, plasticizers andadditives. Mastic is produced in the form of a bundle with a diameter of 50 mm, wrapped in polyethylene film or in the form of a tape wrapped in polyethylene.

Tegeron joint Ecobit sealing frost-resistant non-hardening mastic DSTU B V.2.7-106-2001
Universal, sealing, non-hardening, frost-resistant mixture based on synthetic rubber, plasticizers and additives. Mastic is produced in the form of a bundle with a diameter of 50 mm, wrapped in a polyethylene film or in the form of a tape packed in polyethylene. The mastic provides a reliable connection between the horizontal and vertical elements of the coating, is resistant to aging and easy to use.
Universal, sealing, non-hardening, frost-resistant mixture based on synthetic rubber, plasticizers and additives. Mastic is produced in the form of a bundle with a diameter of 50 mm, wrapped in a polyethylene film or in the form of a tape packed in polyethylene. The mastic provides a reliable connection between the horizontal and vertical elements of the coating, is resistant to aging and easy to use.

PURPOSE:

used for sealing and sealing of road construction seams;
- ground and underground elements completed;
- closed vertical and horizontal joints of the outer walls of a large-panel house;
- sealing of the profiled glass structure; 155
- для уплотнения мест примыкания оконных и дверных блоков к элементам стен жилых и общественных зданий при сохранении свойств в интервале температур от –60°С до +70°С.

PROPERTIES:

- is a viscous homogeneous mass ready for use, which should be mixed if necessary;(//tractor-service.com)

- it easily yields to the pressure of the applied tool;

- has good adhesion to horizontal and vertical surfaces;

- does not contain bitumen;

- does not crack;

- possesses the property of flexibility at low temperatures;

- resistance to flow and shrinkage at high temperatures.

APPLICATION:

The consumption of mastic depends on the size of the joint and is approximately from 0.5 kg to 2.0 kg per 1 p/m. The mastic provides a reliable connection between the horizontal and vertical elements of the coating, is resistant to aging and is easy to use. Before laying in the seams, the mastic should be separated from the polyethylene packaging by burning it with a gas burner. Prepared for use, the mastic is placed in the seams.

STORAGE: Store away from fire at a temperature above 0C.