MBH Ecobit Bitumen-polymer roofing mastic DSTU B V.2.7-108-2001 20 kg, Dnipropetrovsk region.

Mastic MBH Ecobit roofing bitumen-polymer DSTU B V.2.7-108-2001 Mastic for external and internal waterproofing of foundations, basements, balconies, cellars, piles, supports and other objects, concrete, reinforced concrete, metal, wooden and other building structures that go into the ground or are in contact with a wet or aggressive environment, insulation of underground steel pipelines of other structures to protect them from soil corrosion.

Bitumen-polymer mastic MB-X Ecobit DSTU B.V.2.7-108-2001 (GOST 30693-2000)

Mastic for external and internal waterproofing of foundations, basements, balconies, cellars, piles, supports and other objects, concrete, reinforced concrete, metal, wooden and other building structures that go into the ground or come into contact with a wet or aggressive environment, insulation of underground steel pipelines of other structures to protect them from soil corrosion.
REVIEW TESTIMONIALS:

MBH Ecobit mastic is a one-component, universal, multifunctional, ready-to-use cold product. It is a stable, homogeneous solution of petroleum bitumen modifiedpolymer additives, in hydrocarbon solvents with a mineral filler.

The mastic is conveniently applied to the surface using a brush, spatula or rubber mop. During drying, an elastic rubber polymer smooth black coating is formed on the surface.

As a result of the introduction of MBH-U Ecobit bituminous-polymer mastics for cold application, the use of hot bitumen on the objects is excluded, which significantly simplifies and lowers the cost of work, improves the working conditions of roofers, insulators and parquet flooring, and increases the safety of work production.

MBH Ecobit mastic is packed in a plastic container with a capacity of 10, 20 kg.

In agreement with the customer, the mastic packaging can be changed.

MBH Ecobit MASTIC IS INTENDED for:

devices for pouring and repairing mastic roofs,

gluing of rolled materials,

for gluing parquet, chipboard, plywood and other wooden products, linoleum on any surfaces.

anti-corrosion treatment for metal: pipes, fences and other metal surfaces;

for external and internal waterproofing of foundations, basements, balconies, cellars, piles, supports and other objects, concrete, reinforced concrete, metal, wood and other building structures that go into the ground or come into contact with moisture or an aggressive environment.

insulation of underground steel pipelines of other structures to protect them from soil corrosion.

Waterproofing and biocidal treatment of wooden structures in contact with a wet environment (parts of buildings embedded in the ground) ;

for waterproofing swimming pools, bathrooms and showers before laying tiles, tiles

ADVANTAGES OF MBH Ecobit MASTIC:

Waterproofing works with MBH-U Ecobit mastic can be carried out on wet up to (10%) concrete surfaces(//tractor-service.com)

The temperature resistance of the mastic on a slope of 45 is no more than 85 °C

Coatings based on MBH Ecobit mastic have high elasticity at temperatures from +100 to -40 °C

High adhesion (sticking) to various surfaces.

Recommended for use in agriculture during construction and repair of various buildings.

ADMISSION INSTRUCTIONS:

Clean the surface from dirt, remnants of the old coating, loose plastic rust (mechanically). The remaining rust is recommended to be treated with a rust modifier.

Apply thoroughly mixed mastic with a spatula, brush, roller or sprayer for viscous compounds. Apply in layers no more than 1.0 mm thick. One layer is enough for gluing on a well-prepared flat base. It is necessary to apply 2-3 layers for waterproofing and the device of mastic roofs. Each layer is applied after the previous layer has dried "to unstick" (~2-3 hours at t = 20 °C).

Final drying - at least 24 hours. At low temperatures, the drying time increases. Work with mastic is allowed at a temperature not lower than -10 °C. At negative temperatures, the mastic is recommended to be heated to +30.. +50°.

In case of thickening or during spray application, dilute with white spirit "WELLUX" or "AVTONOL", you can use other organic solvents. If the mastic gets on the paintwork, remove it immediately with a rag soaked ingasoline or solvent.

CONSUMPTION: depending on the surface, but 1 kg is recommended. sq. m.

EXPIRY DATE:

In the sealed container of the manufacturer, 24 months from the date of production indicated on the control tape.

SECURITY REQUIREMENTS:

Bitumen-polymer mastic is a fire-hazardous and explosion-proof product due to the properties of the solvents included in its composition.

Protect from fire!

If the bituminous-polymer mastic gets into the eyes, they must be washed thoroughly with water. In case of ingestion, it is necessary to wash it with 2-5% soda solution, induce vomiting and ensure plenty of drinking. In any case, consult a doctor. In case of getting on hands, they must be wiped with a rag soaked in gasoline or another solvent, and then washed with water.

TRANSPORT AND STORAGE:

MBH mastic can be transported by any type of covered transport, which ensures the conditions for transporting flammable goods in compliance with the rules of transportation established for this type of transport.

Bitumen-polymer mastic should be stored in a hermetically sealed container, in a room designed for storing flammable materials, at a temperature from minus 15 to plus 30 °C.