Mastic bitumen-rubber ECOBIT GOST 30693-2000 ( DSTU B V.2.7-108-2001)
Metal bucket: 3 kg, 20 kg (//tractor-service.com)
The mastic is intended for waterproofing the external surfaces of building structures of residential, public, industrial buildings and structures, including: roofs (from a concrete base or rolled carpet that has become unusable), foundations and walls of basements made of concrete or brick. It is possible to use this mastic for external anti-corrosion protection of tanks, sheet steel structures, gas oil pipes, wires and water pipes. Mastic is made on the basis of rubber with the addition of bitumen. One-component mastic, cold hardening. Mastic can be used at temperatures from -50 to +80 C. In these temperature limits, mastic does not release harmful substances.
Bituminous-rubber mastic ECOBIT is applied to a pre-cleaned surface at a temperature of -25°C to +40°C in one or two layers at the rate of 1.5-3 kg per square meter (with a single-layer coating) and 3-6 kg (with a two-layer coating).
Mastic is diluted with white alcohol, solvent,gasoline.
Mastic is stored in a hermetic container in a ventilated room at a temperature not higher than +30 C and protected from direct heat sources. Transport marking is carried out according to GOST 14192-77.
ООО ГЕРМЕТИК UNIVERSAL, www.germetik-universal.com Producer: EKOBIT bitumen for various purposes, EKOBIT hot-use mastics, EKOBIT cold-use mastics and primers, EKOBIT road and airfield sealants, Elastomeric materials (Liquid Rubber) ECOBIT, Cold Asphalt ANTI-PIT