cultivator Guardian capture of KN - 3, 8 m (Bellotta racks //200), Kirovohrad region. 000

= cultivator KN-3,8 with a double (two-stable) rack is intended for Continued cultivation soil, at the same time cuts the root system of weed The cultivator has a double -sized (two -stream) rack of Bellota/Eurozappa:
Культиватор має оновлення двоспіральну (двовиткову) стійку Bellota/Eurozappa:
= Due to the double -headed structure, the rack provides improved strength and wear resistance during intensive use.
= The size of the rack (thickness) 25x25 mm, ideal for your technique

Height: 468 mm
Hole diameter: 12 mm
Weight: 8.95 kg

The rack has a number of advantages:

Made of special high -power steel that can restore primary form
Complex thermal processing
is used for manufacturing The rack is covered with epoxy paint with protection against yulraviolet radiation.
= The cultivator's rake performs the following functions:
- Reduces the combs of the soil;
- equalizes soil microrelief; (// tractor-service.com)
- combs weeds.
The location of the rake with the spring elements behind the triggering cat allows to introduce stubble residues into the soil at a very low depth, which helps to sprout the weed seeds uniformly and at the same time there is a closure of moisture inside the soil, which is a good influence for the development of subsequent crops. At the same time, the issue of soil tubercle formation

Одночасно з цим вирішується питання утворення горбка ґрунту = in the middle of the cats=. The rakes are arranged in such a way that this tubercle is located and the relief of the soil is leveled, which is very important for some crops (beets, etc.).

= The rakes have an auxiliary opening of the slope angle of springs, which helps to adapt the cultivator to the land relief of the field.

CN-3.8 three-row with Eurozappa racks
The cultivator hinged KN-3,8 processes the soil at a depth of 4-12 cm, cuts the root system of weeds, grinds lumps, rolls and aligns the surface of the field, cares for vapor.
= The KN-3,8 cultivator of BMZ has a strong and reliable frame design, which provides a high resource. The scheme of placement of working bodies (stable 70x12) guarantees the work of the unit on any soils without clogging.

Type of unit - hinged
Working width, m - 3.8
Productivity, ha/h - 2,24-3,96
Dimensions, m - 2.5/3,9/1,3
Working speed, km/h - 20
Weight, kg - 770
Power tractor, hp - 80..110