Installation of water supply and drainage systems, Kherson region.

The installation of a bell pipe is carried out by connecting a narrow part of the pipe to a wider one. Such pipelines are mainly used for the removal of waste water and sewerage by gravity. With such installation, it is important to withstand the slope angle of the route, on average up to 15% per 100 meters of the pipeline. Diameters of such pipes are possible from 10 mm to 800 mm inclusive.
Installation of threaded pipes. An external thread is cut on one end of the pipe, and an internal thread on the other side of the pipe. Similar pipes are used for installation of casing pipes for wells.
Installation of steel pipes is carried out using gas-electric welding, soldering. Similar pipes are used for all types of pipelines. The diameter of the pipeline can be any, from 2 mm to 5 meters. A variety of materials - copper, bronze, steel, cast iron, gold, bronze, any metal alloys.(//tractor-service.com)
Installation by the adhesive method is almost the same as the socket, connecting the thin part of the pipe to the extended part, but before that, the parts to be connected are degreased and glue is applied, after which they are connected and left until the glue dries. Installation of the thermal resistor coupling takes place through the thermal coupling, a tungsten thread passes inside the thermal coupling, an electric current is applied to this thread, the tungsten heats up and melts the coupling and the pipe itself. After cooling, the product is ready for use. The diameter can be from 16 mm to 1600 mm inclusive.
Installation with clamp couplings, the coupling is put on the two connecting edges and clamped clockwise with a clamp key. Mainly used at uniform pressure up to 6 bar without water hammer.
Installation by butt welding of PE pipelines is the most reliable, fast and common type of installation connection of engineering systems. With such a connection, the maximum pressure inside the pipe is up to 30 bar, maybe even more - it all depends on the wall thickness, the thicker, the greater the working pressure. But there is one minus - special equipment for butt welding (butt connection) is required. The equipment includes: Transport machine, hydraulic machine, facing element, heating pan, control head and most importantly butt welding control operator. The installation of a pipeline is a hidden earth installation work, and if something is not done correctly, the financial losses can be enormous, and if it concerns contaminated water or sewage, especially pressure, it is also a threat to all living things. Without work experience of at least one year, the presence of documents on completion of training - risks should be taken into account.