FENDT 1038 VARIO wheeled tractor complete with PROFI PLUS, Kyiv region.

FENDT tractor 1038 VARIO in PROFI PLUS configuration
Year of manufacture - 2018
Working time - 6,250 m/h
Diesel, six-cylinder MAN engine, volume 12.4, power 396 hp.
The maximum torque of up to 1910 Nm is achieved at only 1150 rpm on the Fendt 1038 Vario model. The nominal engine speed is only 1700 rpm. The main operating range is 1150 - 1550 rpm.
Transmission type - Stepless/Vario (The Vario Drive concept from Fendt is not only an improved Vario transmission, but also a completely new power transmission.
Until now, in standard transmissions, the rear axle had a constant gear ratio, when the four-wheel drive was turned on, the front axle was also connected with a constant gear ratio. In the new VarioDrive system, the front axle works from an additional transmission shaft independently of the rear axle)(//tractor-service.com)
Forward speed range, km/h. - 0.02 – 50
Backward speed range, km / h. - 0.02 – 33
Productivity of two hydraulic pumps, l/min / Pressure, bar - 210+220=430 l/min. at 200 bar
Number of hydraulic distributor sections, pairs – 4
Navigation system for automatic control of the tractor - VarioGuide Trimble RTK (works with free Egnos signals - accuracy of passes +/- 20 cm and paid Rangepoint RTX - accuracy of passes +/- 15 cm, Centerpoint RTX - accuracy of passes +/- 4 cm, and RTK corrections through Ntrip - accuracy of passes +/- 2 cm).

We also provide a guarantee for the tractor up to 7,000 m.h. or 1 year (whichever comes first)