Conveyor grain dryer, Dnipropetrovsk region.

Depending on modification productivity is from 6 to 44 cubic meters. of product (from 5 to 35 t/h).
It is possible to use any heat source: gas,diesel, solid fuel.
The grain dryer, when fully loaded, is able to fully recoup its cost in one season.
The ability to remove any percentage of moisture in one pass thanks to the adjustment of the speed of the conveyor and the ability to adjust the thickness of the product layer. Humidity and temperature are monitored in real time thanks to sensors at all stages of drying.
The design of the dryer allows working with raw grain (from the field).
Careful treatment of grain allows you to minimize its injury.
The built-in recuperation system allows you to use heated air for grain cooling and save up to 25% of fuel. The hotzones of the grain dryer are insulated with mineral wool, which reduces heat consumption when working in the cold season.
Due to its design feature, the conveyor grain dryer is the most protected against fires, because there are simply no places for grain dust to accumulate. It isgrain that is moved by scrapers along the inclined bed, which in turn prevents the formation of traffic jams.
The design of the grain dryer allows working in a continuous flow mode with grain of different batches and moisture and even with grain of different cultures.
In automatic mode, the samma grain dryer adjusts all the necessary parameters to obtain the required moisture content of the product.
In the design of the grain dryer, general industrial components, tested by time, are used.
The light design allows you to minimize the costs of the foundation.
In the standard configuration, the grain dryer is made of galvanized sheet steel, except for blinds (blinds in any configuration are made of stainless steel).
The grain dryer has a layer of insulation of 50 mm along the vertical walls and 100 mm along the bottom.
Complete with the required number of sensors.
All SKF bearings, Motor reducers - Motovario.
The fan that blows hot air has a special design.

In the maximum configuration, all panels are made of stainless steel. We install an automatic drying system.(//tractor-service.com)

In the economy configuration, the entire body is made of black sheet steel with a zinc primer coating. BUT!!! If necessary, all panels can eventually be replaced with galvanized or stainless ones, since the grain dryer is COMPLETELY assembled on bolts. This makes it possible to replace parts of the grain dryer even when damaged. Markings are applied to each part, according to which you can order a damaged part simply by phone.

The price is indicated for a dryer with a productivity of 6 t/h for corn when moisture is reduced from 25...26 percent to 13.8.

Prices:
Standard - $46,600.
The maximum is $54,500.
Economy - $44,975.

The price of the grain dryer does NOT include the heat source, as the grain dryer itself is universal.

Production period - 1.5-2 months.

Installation and launch within 2-3 days.

Warranty for Economy and Standard - 2 years. Maximum - 3 years.

Tech. 24/7 support, because we understand who we work with.