= 4000 kg. hours. Denmark. Cormall RBS 260, Poltava region

Стаціонарний, багатофункціональний електричний подрібнювач RBS від Cormall економічно та ефективно подрібнює вашу солому, незалежно від того, використовуєте ви звичайні, великі чи круглі тюки. Спеціальна конструкція забезпечує високу потужність і низьке енергоспоживання. straw is fed from the tables of automatic supply of raw materials to the shredder, and the level sensors maintain a uniform load of the material in the straw cutting. The drum rotates and provides constant supply of material to the crushed elements, blades. Productivity is controlled by the lift and lowering of the grate over the speed of rotation of the rotor, and the drum.
The crushing= straw falls= into the transport auger, through the second stone stamina and further to= Hammer Fruste== where the raw material is ground into a smaller fraction.
Straw cuttings your straw economically and efficiently, regardless of whether large square or small small bales you use. The grinding rotor is equipped with knives on both sides of the primary stones for knife protection. Grinding straw from large bales, round bales, etc. to fragments approximately 80 mm on average and the dosage of material for a hammer mill.

Technical characteristics of straw cutting:
(// tractor-service.com)
Grinding of straw from large bales, round bales, etc. to pieces of about 80 mm in size and the dosage of the material for the hammer mill, first submitting the material to the stones at the end of the auger.
= Power: 30 kW main engine, and 1.5 kW rpm drum.
Auger trace of 2.2 kW in the rotor of the shredder:
Productivity at 30 kg/m3 = 4050 kg/h.

Production of equipment for
Biomass granulation and briquetting (waste).