full complex for walnut processing (200 kg / h), Poltava region

full complex of walnut processing the process and minimizes the use of manual force. nut.

Walnut peeling machine standard - nuts of maximum productivity. Due to the conical type of compression, the nut can work without prior calibration of nut and gives a high output of the whole kernel.

= Productivity

Up to 200 kg/h

Exit of the whole core

Up to 80% (may increase or decrease depending on the quality of the nut)

Engine power

1.5 kW

Equipment

380/220 V

Guarantee

12 months, post -warranty service

The principle of split

conical

The calibrator is intended for sorting walnuts in a shell by size. Calibration saves time and effort to set up nut and increases the exit of a whole core.

= Productivity

Up to 500 kg/h

Number of fractions

4

The sizes of holes

28, 32, 36, 40 mm

Engine power

0,75 kW

Equipment

220/380 in

Guarantee

12 months, post -warranty service

Можливість калібрувати

Walnut

Vibroxyto with aspiration is designed for screening of shells, partitions and dust from the nucleus of nut and sorting of the nucleus by fractions (sizes) - halves, quarters, eighth nucleus and crumb. Vibrosito with aspiration is used for high quality and fast sorting of nut in large volumes.

Productivity

Up to 300 kg/h

Dimensions of holes

11, 16, 20/45 mm (can be changed at customer request)

Потужність двигуна

3.3 kW

Equipment

380 in

Guarantee

12 months, post -warranty service

Підйомний конвеєр використовується для переміщення горіха між установками, а саме з nuts to vibrous. The conveyor reduces manual labor and ensures the smooth operation of the equipment.= Engine power

The hopper adjustment in height

are

Engine power

0.55 kW

Equipment

220 V

Guarantee

12 months, post -warranty service

In the processing of walnuts from the population there will be a percentage of vague, since the nut is not not varietal. For a quick reproduction, reducing the amount of manual labor and automation of production is used by a repayer.

The fee can be installed immediately after nut (if the exit of the whole nucleus is not important) or after vibration with aspiration (if it is important to get 1/2).

Product

Up to 200 kg/h

The output of the kernel

Crumb, 1/8 and ¼ (depending on the quality of nut and the adjustment settings)

Потужність двигуна

1.1 kW

Equipment

380 in

Guarantee

12 months, post -warranty service

The principle of split

drum

Inspectorate table is used for visual control of walnut nucleus. The kernel moves on the tape and staff monitors the quality, in case of detection of inappropriate core or pieces of shell it is taken to the side.

Speed adjustment

are

The speed of movement of the tape

0,1-0,3 m/s

Engine power

0.55 kW

Equipment

220/380 in

Guarantee

12 months, post -warranty service

Approximate calculations and costs of equipment productivity, rent of premises:

Продуктивність промислової лінії до 200 кг/год. При нормованому 8-ми годинному робочому дню, обладнання здатне переробити до 1600 кг горіха (калібрування, розкол, сортування горіха).

= One operator is required to maintain each installation. The optimal number of personnel for continuous and quality work of equipment: 8-13 people (the number will depend on the room, the experience of workers, the number of low-faces).

= Premises: from 100 sq.00
Line length: 1580 cm.
Line Width: 590 cm.
Approximate electricity costs: 57.6 kW: (0.75+1.5+3.3+0.55+0.55+0.55 kW)*8 = 57.6 kW
* Where 8 is the number of hours, and in brackets - the consumption of the power of each of the installations.

Number of staff: 8-13 people.
* The line can be converted and completed to customer requests. You can