I will sell kruporushka, Dnipropetrovsk region.

Seal mill for processing 9 types of grain crops (wheat, buckwheat, millet, barley,corn, peas, rice, oats, soy) consists of
of the following main units: rassev, three-stream noria, peeling unit, fan and cyclone.
The following technical solutions are used in this installation:
• grain is processed in a roller unit with the help of metal or polyurethane rollers;
• light fractions are selected by the aspiration system immediately after peeling and do not fall on the sieves;
• sieves are cleaned with brushes in automatic mode;
• the section ofgrain cleaning, grain calibration and groat sorting after husking is performed by one unit;
• the presence ofwheels and stops allows you to move the equipment and install it on any surface without foundations.
The initial grain is loaded into the receiving hopper, from where the first stream of the noria is fed to the calibration site for calibration or cleaning.
In the calibration mode, the grain is divided into 4 fractions, and three fractions are accumulated in bags for further processing,(//tractor-service.com)
and the fourth fraction is sent to peeling by the second stream of the noria.
In the cleaning mode, coarse and fine garbage are placed in bags, and clean grain is sent to the second stream of the noria for crushing.
After peeling (shredding) the groats are fed through the third stream of the noria to the sorting area, where the finished groats are selected.
flour and cut, and unhusked grain is automatically returned for reprocessing.
The process of husking or cutting the grain and picking the husk can be visually observed and regulated thanks to the plexiglass wall.
The reconfiguration of the grain mill for different types of grain consists in replacing the sieves and rollers.
Thus, for wheat, corn and barley, soybeans, metal rollers are needed, which, thanks to a special cut and speed of rotation.
they cut the grain instead of rubbing it, which allows you to get the maximum yield of the finished product.
(wheat 90%, corn 75%, barley 70%, soy 70%).
The productivity of the modular grain line varies from 300 to 3000 kg/hour (grain factory, grain factory).